1 Mil Kapton Tape Polyimide – 1/2″ X 36 Yds

#ad
#ad
Tapes Master 3M 5413 kapton tape alternative #ad - 1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. 1mil kapton tape is developed by Dupont which is a HN general purpose film with silicon adhesive. Kapton® is a registered trademark of DuPont 1 mil polyimide Tape Kapton® RoHS compliant.

1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface. Kapton® polyimide films shows excellent electrical insulation properties, high temperature resistant, and excellent solvent resistant. Kapton tape combines excellent physical, electrical, and mechanical properties, and has been used in applications at temperatures as low as -273°C -459°F and as high as 400°C 752°F.

1 Mil Kapton Tape Polyimide - 1/2" X 36 Yds #ad - Technical data sheet: color: Amber Adhesion Type: Silicone Film Thickness: 1. 2 mil adhesive Thickness: 1. 5mil total Thickness: 2. 7 mil adhesion to steel: 25 oz//inch tensile strength: 30 lbs/inch elongation: >40 % dielectric strength: 8, 000 mega ohms electrolytic corrosion factor: 1 insulation class centigrade: 180°C Temperature Resistance: 260°C 500°F Resistance to acids, 000, solvents: Excellent Length: 36 yards Due to the variety of possible end-uses, 000 volts UL-94 Flammability Rating: V-0 Insulation Resistance: 1, oils, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.

More information about Tapes Master 3M 5413 kapton tape alternative #ad

1 Mil Kapton Tape Polyimide - 1" x 36 yds

#ad
#ad
Lucent Path CECOMINOD021126 #ad - Technical data sheet: color: Amber Adhesion Type: Silicone Film Thickness: 1. 2 mil adhesive Thickness: 1. 5mil total Thickness: 2. 7 mil adhesion to steel: 25 oz//inch tensile strength: 30 lbs/inch elongation: >40 % dielectric strength: 8, 000 mega ohms electrolytic corrosion factor: 1 insulation class centigrade: 180°C Temperature Resistance: 260°C 500°F Resistance to acids, oils, solvents: Excellent Length: 36 yards Due to the variety of possible end-uses, 000, 000 volts UL-94 Flammability Rating: V-0 Insulation Resistance: 1, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.

. Kapton® polyimide films shows excellent electrical insulation properties, high temperature resistant, and excellent solvent resistant. 1mil kapton tape is developed by Dupont which is a HN general purpose film with silicon adhesive. 1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface.

1 Mil Kapton Tape Polyimide - 1" x 36 yds #ad - Kapton® is a registered trademark of DuPont 1 mil polyimide Tape Kapton® RoHS compliant. Kapton tape combines excellent physical, electrical, and mechanical properties, and has been used in applications at temperatures as low as -273°C -459°F and as high as 400°C 752°F.1 mil polyimide Tape shows excellent electrical insulation.

1 mil polyimide tape maintains high temperature resistance as high as 400F.

More information about Lucent Path CECOMINOD021126 #ad


Similar products



1 Mil Kapton Tape Polyimide - 1/4" X 36 Yds

#ad
#ad
Tapes Master CECOMINOD007100 #ad - 1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. 1mil kapton tape is developed by Dupont which is a HN general purpose film with silicon adhesive. Kapton® is a registered trademark of DuPont 1 mil polyimide Tape Kapton® RoHS compliant.

1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. 1 mil polyimide Tape Kapton® RoHS compliant. Kapton® polyimide films shows excellent electrical insulation properties, high temperature resistant, and excellent solvent resistant.

1 Mil Kapton Tape Polyimide - 1/4" X 36 Yds #ad - Technical data sheet: color: Amber Adhesion Type: Silicone Film Thickness: 1. 2 mil adhesive Thickness: 1. 5mil total Thickness: 2. 7 mil adhesion to steel: 25 oz//inch tensile strength: 30 lbs/inch elongation: >40 % dielectric strength: 8, 000, 000 mega ohms electrolytic corrosion factor: 1 insulation Class centigrade: 180°C Temperature Resistance: 260°C 500°F Resistance to acids, solvents: Excellent Length: 36 yards Due to the variety of possible end-uses, oils, 000 volts UL-94 Flammability Rating: V-0 Insulation Resistance: 1, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.

1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface. Kapton tape combines excellent physical, electrical, and mechanical properties, and has been used in applications at temperatures as low as -273°C -459°F and as high as 400°C 752°F.

More information about Tapes Master CECOMINOD007100 #ad


Similar products



CCTREE 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend for Creality CR-10,10S,S4,S5,Ender 3, Anet A8

#ad
#ad
CCTREE CC-MK9-Cover #ad - 1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. Made of non-stick silicone material. 1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface.

1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. 1 mil polyimide Tape Kapton® RoHS compliant. 1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface.

CCTREE 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend for Creality CR-10,10S,S4,S5,Ender 3, Anet A8 #ad - Materil:silicone color: coffee item Weight: 2g Item Size: 22 x 22 x 15mm/ 066 * 066 * 06in approx. Package list: 3 x silicone Cover 1 mil polyimide Tape Kapton® RoHS compliant. Helps to keep the hotend temperature extremely stable. Can extend the life of the heater block and extruder by keeping it cleaner.

High temperature resistance: 280℃.

More information about CCTREE CC-MK9-Cover #ad


Similar products



1 Mil Kapton Tape Polyimide, 3/4" x 36 yds

#ad
#ad
Tapes Master CECOMINOD015598 #ad - Kapton® is a registered trademark of DuPont 1 mil polyimide Tape Kapton® RoHS compliant. 1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. Made of non-stick silicone material. Technical data sheet: color: Amber Adhesion Type: Silicone Film Thickness: 1.

2 mil adhesive Thickness: 1. 5mil total Thickness: 2. 7 mil adhesion to steel: 25 oz//inch tensile strength: 30 lbs/inch elongation: >40 % dielectric strength: 8, oils, 000, solvents: excellent length: 36 yards due to the variety of possible end-uses, 000 volts UL-94 Flammability Rating: V-0 Insulation Resistance: 1, 000 mega ohms Electrolytic Corrosion Factor: 1 Insulation Class centigrade: 180°C Temperature Resistance: 260°C 500°F Resistance to acids, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application.

1 Mil Kapton Tape Polyimide, 3/4" x 36 yds #ad - Helps to keep the hotend temperature extremely stable. Can extend the life of the heater block and extruder by keeping it cleaner. High temperature resistance: 280℃. Professional for 3D printer extruder. 1 mil polyimide Tape Kapton® RoHS compliant. 1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F.

More information about Tapes Master CECOMINOD015598 #ad


Similar products



Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8, CR-10, CR-10S, CR-10 S4, and CR-10 S5

#ad
#ad
Creality 3D #ad - 1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface. 1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. Made of non-stick silicone material.

Used for 1. 75mm filament. 1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface. Helps to keep the hotend temperature extremely stable. Can extend the life of the heater block and extruder by keeping it cleaner. High temperature resistance: 280℃.

Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8, CR-10, CR-10S, CR-10 S4, and CR-10 S5 #ad - Professional for 3D printer extruder. 1 mil polyimide Tape Kapton® RoHS compliant. 1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. Original aluminum drive feed for creality 3d cr-7, CR-10 S5, CR-10, CR-8, cr-10 s4, it is stable and durable.

Mk8 extruder drive feed kit, cr-10 s4, can replace acrylic parts of CR-10, CR-10 S5.

More information about Creality 3D #ad


Similar products



ChipQuik SMD-291 No Clean Flux in 10cc. 1 Ounce Syringe with Nozzle

#ad
#ad
Chipquik SMD291 #ad - Noclean paste Flux; 10cc syringe with tip. 1 mil polyimide Tape Kapton® RoHS compliant. 1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. Original aluminum drive feed for creality 3d cr-7, CR-8, CR-10, CR-10 S5, cr-10 s4, it is stable and durable.

Mk8 extruder drive feed kit, can replace acrylic parts of CR-10, cr-10 s4, CR-10 S5. Full metal Aluminum Alloy. 1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface. Diy aluminum block, need to assembly by yourself.

ChipQuik SMD-291 No Clean Flux in 10cc. 1 Ounce Syringe with Nozzle #ad - To use: apply paste flux to all leads with syringe; melt ChipQuik alloy on all pins of SMD; with wide iron tip; maintain alloy in a molten state long enough to release chip; lift chip from board with pick-up tool. Remove qfds, plccs, soics and chip components without costly and complex equipment. Safe, affordable, easy and won't damage sensitive components.

Low melting temperature. Special removal alloy has excellent wetting ability with a low melting temperature of 136F 58C. Safe, affordable, easy and won't damage sensitive components. 1 mil polyimide Tape is silicon adhesive protection leaves no residue.

More information about Chipquik SMD291 #ad


Similar products



GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch

#ad
#ad
GOCHANGE #ad - 1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. 1 mil polyimide Tape Kapton® RoHS compliant. Diy aluminum block, need to assembly by yourself. Special removal alloy has excellent wetting ability. 1 mil polyimide Tape shows excellent electrical insulation.

1 mil polyimide tape maintains high temperature resistance as high as 400F. Original aluminum drive feed for creality 3d cr-7, CR-8, CR-10, CR-10 S5, cr-10 s4, it is stable and durable. Mk8 extruder drive feed kit, can replace acrylic parts of CR-10, cr-10 s4, CR-10 S5. Full metal Aluminum Alloy. One year warranty & 24 hours of customers service: safe and durable with strict quality testing.

GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch #ad - If you still have questions after your purchase, Please contact us by e-mail. Features:1. Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing2. Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts3.

Perfect tool for cutting tubes or pipes made of copper, PVC, or aluminum, brass, plastic and more.4.

More information about GOCHANGE #ad


Similar products



Pimoroni Speaker pHAT for 40-Pin Raspberry Pi

#ad
#ad
Pimoroni PIM254 #ad - Low melting temperature. Used for 1. 75mm filament. It's the neatest way to add audio to you pi project, notification sounds, but it's perfect for fun little projects where you want to add sound output - speech, and its beautiful artwork evokes an 80s boombox! We can't claim audiophile sound quality, or light music, for example.

Use with existing rework equipment or temp controlled soldering irons. 1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface. 10 bright white bar graph LEDs. 1 mil polyimide Tape shows excellent electrical insulation.

Pimoroni Speaker pHAT for 40-Pin Raspberry Pi #ad - 1 mil polyimide tape maintains high temperature resistance as high as 400F. Made of non-stick silicone material. Bottom rotating wheel adjusts the cutter to the proper fit in a seamless smooth movement. Specifically designed for use in restricted spaces on small diameter, mechanics, aluminum, brass and plastic tubing.

Strong and lightweight: gochange mini tube cutter is small but strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts. I2s audio dac with 3w mono amplifier MAX98357A Default output of 045w/26.

More information about Pimoroni PIM254 #ad


Similar products



SIQUK 2 Pieces PTFE Teflon Tube 2 Meters + 4 Pieces PC4-M6 Quick Fitting + 4 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament 

#ad
#ad
SIQUK #ad - If you still have questions after your purchase, Please contact us by e-mail. Remove qfds, plccs, soiCs and chip components without costly equipment. Teflon tube: outside diameter 4mm, inside diameter 2mm; density 2. 15-2. 20g/cm3; it made of premium ptfe poly tetra Fluoro Ethylene material, safety and non-toxic, heat resistant up to 260℃.

Pc4-m6 fittings: thread m6/3mm, inner diameterblue end 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. Pc4-m10 fittings: thread m10/6mm, high hardness, the fitting made of stainless steel and plastic, inner diameterblack end 4mm, antioxidtion, fit for the tube whose outer diameter is 4mm, anti corrosion.

SIQUK 2 Pieces PTFE Teflon Tube 2 Meters + 4 Pieces PC4-M6 Quick Fitting + 4 Pieces PC4-M10 Straight Pneumatic Fitting Push to Connect for 3D Printer 1.75mm Filament  #ad - Compatibility: compatible with all 1. 75mm pla abs 3D printer. 1 mil polyimide Tape shows excellent electrical insulation. 1 mil polyimide tape maintains high temperature resistance as high as 400F. Original aluminum drive feed for creality 3d cr-7, CR-10 S5, CR-8, cr-10 s4, CR-10, it is stable and durable. Mk8 extruder drive feed kit, cr-10 s4, can replace acrylic parts of CR-10, CR-10 S5.

Full metal Aluminum Alloy. 1 mil polyimide Tape shows excellent electrical insulation.

More information about SIQUK #ad


Similar products



MG Chemicals 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser Complete with Plunger & Dispensing Tip

#ad
#ad
MG Chemicals 8341-10ML #ad - Diy aluminum block, need to assembly by yourself. Making tube cutting easy: quick and easy way to get clean rounded cuts on tubing from 012" - 087" outer diameter in tight areas and close quarters with GOCHANGE Tube Cutter. Teflon tube: outside diameter 4mm, inside diameter 2mm; density 2. 15-2. 20g/cm3; it made of premium ptfe poly tetra Fluoro Ethylene material, safety and non-toxic, heat resistant up to 260℃.

Pc4-m6 fittings: thread m6/3mm, inner diameterblue end 4mm, the fitting made of premium copper and plastic, fit for the tube whose outer diameter is 4mm, sturdy and durable. Pc4-m10 fittings: thread m10/6mm, inner diameterblack end 4mm, high hardness, the fitting made of stainless steel and plastic, antioxidtion, fit for the tube whose outer diameter is 4mm, anti corrosion.

MG Chemicals 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser Complete with Plunger & Dispensing Tip #ad - Compatibility: compatible with all 1. 75mm pla abs 3D printer. 1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface. 1 mil polyimide Tape is silicon adhesive protection leaves no residue. 1 mil polyimide Tape is thin and conformable enabling masking of uneven surface.

Used for 1.

More information about MG Chemicals 8341-10ML #ad


Similar products