Control Devices ST Series Brass ASME Safety Valve, 125 psi Set Pressure, 1/4″ Male NPT

#ad
#ad
Control Devices ST25-1A125 #ad - 1/4" male npT threaded inlet connection. This safety valve is american society of Mechanical Engineers ASME safety rated and displays the UV mark for pressure vessel safety valves. The preset relief pressure is accurate to within +/- 3 percent and a silicon O-ring provides a leak-proof seal to within +/- 10 percent of the relief pressure.

. The valve's brass body, brass valve seat, and the zinc plated steel spring resist corrosion and can be used in operating temperatures up to 250 degrees F. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. Asme safety rated with UV and NB marks.

Control Devices ST Series Brass ASME Safety Valve, 125 psi Set Pressure, 1/4" Male NPT #ad - This control devices st25-1a125 asme safety valve has a brass body, a 125 psi relief pressure, a 1/4" male NPT threaded inlet connection, and a stainless steel pull ring for manual pressure relief.250 degrees f maximum temperature for use in high temperature applications. Relief pressure preset to 125 psi with flow rate of 116 cfm.

Brass construction and stainless steel spring for corrosion resistance. Relief valves are used in a variety of applications, petrochemical and chemical manufacturing, such as air compressors, natural gas processing, and power generation. Control devices manufactures valves and other flow control devices.

Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates.

More information about Control Devices ST25-1A125 #ad

Control Devices ST Series Brass ASME Safety Valve, 150 psi Set Pressure, 1/4" Male NPT

#ad
#ad
Control Devices ST25-1A150 #ad - This safety valve is american society of Mechanical Engineers ASME safety rated and displays the UV mark for pressure vessel safety valves. 250 degrees f maximum temperature for use in high temperature applications. The company, founded in 1963, is headquartered in Fenton, MO. Brass construction and stainless steel spring for corrosion resistance.

They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. 1/4" male npT threaded inlet connection. Asme safety rated with UV and NB marks. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation.

Control Devices ST Series Brass ASME Safety Valve, 150 psi Set Pressure, 1/4" Male NPT #ad - Control devices manufactures valves and other flow control devices. It also displays the nb mark for certification in accordance with NB-501, National Board Certification of Pressure Relief Devices. The valve's brass body, brass valve seat, and the zinc plated steel spring resist corrosion and can be used in operating temperatures up to 250 degrees F.

This safety valve has a 116 cubic feet per minute CFM flow rate and is suitable for low capacity pressure relief applications such as in home construction air compressors. Relief valves remove excess pressure or vacuum from a system. Relief pressure preset to 150 psi with flow rate of 136 cfm.

More information about Control Devices ST25-1A150 #ad


Similar products



Performance Tool 0-200 PSI Air Gauge for Air Tank Accessory W10055

#ad
#ad
Wilmar Performance Tool W10055 #ad - Replacement gauge for air compressor or compressed air tank. Easy to read two color gauge. 0 to 200 psI. Bottom mount. Measures 0 to 200 PSI. 1/4" male npT threaded inlet connection. Asme safety rated with UV and NB marks. Easy to read two color gauge. Brass construction and stainless steel spring for corrosion resistance.

250 degrees f maximum temperature for use in high temperature applications. 1/8" npt. Relief pressure preset to 150 psi with flow rate of 136 cfm.

More information about Wilmar Performance Tool W10055 #ad


Similar products



Milton S-684-4 1/4" MNPT Male Tank Valve

#ad
#ad
Milton S-684-4 #ad - Asme safety rated with UV and NB marks. 250 degrees f maximum temperature for use in high temperature applications. Standard valve core with plastic cap measures at 1 1/2" overall length. Easy to read two color gauge. 0 to 200 psI. Bottom mount. Milton s-684-4 1/4" mnpt male tank valve 1/4" MNPT tank valves are designed for use in filling vessels with air.

Since 1943 milton has been producing Quality Air Accessories. 1/4" male npT threaded inlet connection. Brass construction and stainless steel spring for corrosion resistance. Overall length with cap: 1. 5 inch. Designed: for use with air compressor tanks to fill vessels with air. Ideal: tank valve prevents air from leaking out while allowing for air to pass through for inflation.

Milton S-684-4 1/4" MNPT Male Tank Valve #ad - Npt: 1/4" male national pipe thread. Other recommended tank valve size: milton #S-684 ⅛” male NPT, 1” overall length w/cap tank valve. 1/8" npt. Milton covers automotive, industrial, hardware, agriculture, heavy-duty fleet and MRO markets. Cap thread size of.

More information about Milton S-684-4 #ad


Similar products



Control Devices Brass Ball Check Valve, 1/4" NPT Female x NPT Male

#ad
#ad
Control Devices P2525-1WA #ad - 250 degrees f maximum temperature for use in high temperature applications. Overall length with cap: 1. 5 inch. Designed: for use with air compressor tanks to fill vessels with air. Ideal: tank valve prevents air from leaking out while allowing for air to pass through for inflation. Npt: 1/4" male national pipe thread.

Milton covers automotive, industrial, hardware, agriculture, heavy-duty fleet and MRO markets. Can be used as a tank check valve for small compressors or as a component in pneumatic circuits. The valve body is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Control Devices Brass Ball Check Valve, 1/4" NPT Female x NPT Male #ad - The npt threads create a tighter seal than straight threads. 1/8" npt. Easy to read two color gauge. 0 to 200 psI. Bottom mount. Fluorocarbon O-rings provide higher temperature and chemical resistance. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The control devices ball-type check valve provides tight sealing, and can be used as a tank check valve for small compressors or as a component in pneumatic circuits.

Check valves are rated by their cracking pressure the minimum upstream pressure required for the valve to operate, and they are used in various water, air, gas, and steam lines.

More information about Control Devices P2525-1WA #ad


Similar products



Lefoo Pressure Switch Control 90-125psi 4 Port Heavy Duty 26 Amp for Air Compressor LF10A-4H-1-NPT1/4-90-125

#ad
#ad
lefoo L4 26A LEFOO #ad - 250 degrees f maximum temperature for use in high temperature applications. 1/4" four port female npt connection Relief pressure preset to 150 psi with flow rate of 136 cfm. See attached pics for details. Brass construction and stainless steel spring for corrosion resistance. Overall length with cap: 1. 5 inch.

Designed: for use with air compressor tanks to fill vessels with air. Ideal: tank valve prevents air from leaking out while allowing for air to pass through for inflation. Npt: 1/4" male national pipe thread. Fluorocarbon O-rings for higher temperature and chemical resistance. Pressure settings are adjustable.

Lefoo Pressure Switch Control 90-125psi 4 Port Heavy Duty 26 Amp for Air Compressor LF10A-4H-1-NPT1/4-90-125 #ad - Heavy duty lefoo pressure switch 26amp 95-125 Four port w/ unloader & on/off lever. Asme safety rated with UV and NB marks. Easy to read two color gauge. 0 to 200 psI. Bottom mount. Cap thread size:. 305-32.

More information about lefoo L4 26A LEFOO #ad


Similar products



Viair 90101 85-105 PSI Pressure Switch

#ad
#ad
Viair 90101 #ad - Relief pressure preset to 150 psi with flow rate of 136 cfm. 250 degrees f maximum temperature for use in high temperature applications. Female and male NPT threads for connecting pipes with different ends. Brass construction and stainless steel spring for corrosion resistance. Dual 1/4 inch spade connectors.

Viair 90101 85-105 PSI Pressure Switch #ad - Easy to read two color gauge. 0 to 200 psI. Bottom mount. 85 psi on and 105 PSI off. Asme safety rated with UV and NB marks. Viair recommendeds using the pressure switch with a relay. Please consult manufacturer's website for wiring diagram. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Pressure settings are adjustable. Milton covers automotive, industrial, agriculture, hardware, heavy-duty fleet and MRO markets. Can be used as a tank check valve for small compressors or as a component in pneumatic circuits. 1/8 inch npT male port connection. Overall length with cap: 1. 5 inch.

More information about Viair 90101 #ad


Similar products



Anderson Metals 06102 Brass Pipe Fitting, Barstock Cross, 1/4" x 1/4" x 1/4" x 1/4" NPT Female Pipe

#ad
#ad
Anderson Metals 06102-04 #ad - The cross fitting has four openings positioned at 90-degrees from each other for connecting and branching four pipes. Includes: standard valve core and plastic cap. 1/8 inch npT male port connection. When purchasing pipe fittings, as this will affect material type, shape, consider the application, size and required durability.

Easy to read two color gauge. 0 to 200 psI. Bottom mount. And its territories. Viair recommendeds using the pressure switch with a relay. Please consult manufacturer's website for wiring diagram. Cross for connecting and branching four pipes. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules pipe wall thickness.

Anderson Metals 06102 Brass Pipe Fitting, Barstock Cross, 1/4" x 1/4" x 1/4" x 1/4" NPT Female Pipe #ad - Anderson metals manufactures brass fittings, valves, and pipe nipples. Relief pressure preset to 150 psi with flow rate of 136 cfm. Free shipping. The barstock cross has fair vibration resistance and is suitable in low to medium pressure applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries.

Brass can be connected to copper, brass, aluminum, plastic, and welded steel.

More information about Anderson Metals 06102-04 #ad


Similar products



Vixen Horns 90-115 PSI Air Pressure Switch Tank Mount Type 1/4" NPT 12V/24V for Train/Air Horn VXA7115

#ad
#ad
Vixen Horns #ad - 85 psi on and 105 PSI off. Overall length with cap: 1. 5 inch. Designed: for use with air compressor tanks to fill vessels with air. Ideal: tank valve prevents air from leaking out while allowing for air to pass through for inflation. Npt: 1/4" male national pipe thread. Milton covers automotive, agriculture, industrial, hardware, heavy-duty fleet and MRO markets.

Can be used as a tank check valve for small compressors or as a component in pneumatic circuits. Cap thread size:. 305-32. Maximum air pressure: 200 pounds per square inch PSI. Milton is your number 1 source for Quality Air Accessories. Viair recommendeds using the pressure switch with a relay. Please consult manufacturer's website for wiring diagram.

Vixen Horns 90-115 PSI Air Pressure Switch Tank Mount Type 1/4" NPT 12V/24V for Train/Air Horn VXA7115 #ad - Cross for connecting and branching four pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. 250 degrees f maximum temperature for use in high temperature applications.

The threaded side is ¼" NPT Male.

More information about Vixen Horns #ad


Similar products



New H/D Pressure switch for air compressor 95-125 w/Unloader

#ad
#ad
lefoo 1H #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Tank Mount Type. 1/8 inch npT male port connection. 250 degrees f maximum temperature for use in high temperature applications. Easy to read two color gauge. 0 to 200 psI. Bottom mount. Since 1943 milton has been producing Quality Air Accessories.

New H/D Pressure switch for air compressor 95-125 w/Unloader #ad - Maximum pressure rating of 250 psi and maximum working temperature of 250 degrees Fahrenheit. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Fluorocarbon O-rings for higher temperature and chemical resistance. Turn on air compressor @ 90 PSI. Lefoo pressure switch 95-125 single port with unloader & on/off lever.

1/4" male npT threaded inlet connection. Asme safety rated with UV and NB marks. 85 psi on and 105 PSI off. And its territories. Thread: ¼ inch. High Accuracy.

More information about lefoo 1H #ad


Similar products



Anderson Metals 56122 Brass Pipe Fitting, Hex Nipple, 1/4" x 1/4" NPT Male Pipe

#ad
#ad
Anderson Metals 56122-04 #ad - Female npt threads for connecting to male threaded pipes. Cap thread size:. 305-32. Maximum air pressure: 200 pounds per square inch PSI. Milton is your number 1 source for Quality Air Accessories. Overall length with cap: 1. 5 inch. Designed: for use with air compressor tanks to fill vessels with air. Ideal: tank valve prevents air from leaking out while allowing for air to pass through for inflation.

Anderson Metals 56122 Brass Pipe Fitting, Hex Nipple, 1/4" x 1/4" NPT Male Pipe #ad - Npt: 1/4" male national pipe thread. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Asme safety rated with UV and NB marks. Operating temperature range of -65 to +250 degrees F. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability.

Maximum pressure rating of 250 psi and maximum working temperature of 250 degrees Fahrenheit. And its territories. Includes: standard valve core and plastic cap. Male npt threads for connecting to female threaded pipes. Female and male NPT threads for connecting pipes with different ends.

More information about Anderson Metals 56122-04 #ad


Similar products