DIGITEN Digital LCD Thermostat Pre-Wired Temperature Controller Heating Cooling 2 Stage Outlet

#ad
#ad
DIGITEN #ad - Max output load: [email protected], [email protected], max current: 10A. Specifications: power supply: 100-240vac 50/60hz temperature control range: -40~120℃-40~248℉ Temperature Control Mode: Heating and Cooling Temperature Resolution: 01℃, 01℉ temperature accuracy: ±1℃ ±1℉ buzzer alarm: high and low temperature alarm input sensor: ntc waterproof, plug and play design, glare free and eye protected, sensor length:Approx 2m6 fts Input Power Cable Length: 1m 3ft Input Power Cable Length: 120 cmOutput Power Cable Length: 30cm Controller Dimension: 137*65*28mm Packaging include: 1 x DTC-102 Temperature Controller 1 x NTC sensor 1 x Manual Large lcd screen, easy to read and programme.

The temperature sensor is made of silicone, is waterproof with high quality, high-accuracy. Dual relay output, can control heating and refrigeration equipment at the same time. Support reading with Centigrade or Fahrenheit unit. Features: large lcd screen, control heating and refrigeration equipment at the same time; support reading with centigrade or fahrenheit unit; max current: 10A; Max output load: [email protected], [email protected]; Easy to use and program, glare free and eye protected; Dual relay output, Plug and play device; Built-in a temperature correction function; Delay starting protection for refrigerating compressor; High and low temperature alarms are available; Over-temperature and sensor fault alarm; Heating/Cooling differential could be set separately for refrigeration and heating to protect temperature controller from violent change; Can use heating or cooling function separately.

More information about DIGITEN #ad

735 CFM Exhaust Duct Fan, Built-in Speed Controller, ETL Listed, Pre-Wired 6 FT Grounded Cord - 8" Inline Fan - Great Use in Grow Tent with Carbon Filters, Light Fixtures, Intake. Fits 8 Inch Ducts.

#ad
#ad
TerraBloom #ad - If you need to remove/relocate the fan and mounting bracket From The Wall, Always Attach Supplied Mounting Bracket Indicating Airflow Direction With An Arrow to The Wall First. Once mounting bracket is screwed into the Wall, You Can Remove Central Section Of The Fan Motor Section Out Of Th. And can be easily mounted to the ceiling of your grow tent Using Ratchet Hangers Or Zip Ties.

This allows speed adjustment to Control Airflow, Energy Consumption And Noise Level Output. 8" duct fan design and installation: this 8" fan is made from black abs plastic. Terrabloom 8" inline fan model TB-MFIF-8 is a versatile unit for a wide range of applications. 1 year manufacturer warranty against any manufacturing defects.

735 CFM Exhaust Duct Fan, Built-in Speed Controller, ETL Listed, Pre-Wired 6 FT Grounded Cord - 8" Inline Fan - Great Use in Grow Tent with Carbon Filters, Light Fixtures, Intake. Fits 8 Inch Ducts. #ad - It can be used to extract odors from enclosed environments and is powerful enough to pull air through Carbon Filters Scrubbers of sizes 8" x 24" or less. It weights only 5. 5 lbs. Due to its compact dimensions and light weight this duct fan is easy to install. 8inch in line grow tent fan: use this inline fan as exhaust fan, intake fan, carbon Filter Fan or Light Fixture Cooling Fan in Your Grow Tent.

The controller allows to reduce the speed Of The Fan From 100% to About 50% of Max Output. This fan attaches seamlessly to all 6in TerraBloom Carbon Filters And Other Equipment With 8 Inches 200mm Duct Openings.

More information about TerraBloom #ad


Similar products



2 HYDROFARM ACF16 Active Air 16" Wall Mountable Oscillating Hydroponic Fans

#ad
#ad
Active Air 2 x ACF16 #ad - Smooth and quiet operation. Bracket openings are different on each side allowing Fan To Install Only in 1 Direction. 3 speed settings. 90° oscillating action. This inline duct fan is not suitable For Applications with Ambient Air Temperatures Over 140°F, Current 1. 59a, speed 2450 rpm, built-in fan motor speed controller, power 205w, Hot Environment Will Deform The Impeller And Trigger Temperature Safety Sensor Causing Fan To Stop Operating.

Variable fan speed control: this 8 inch inline fan is equipped with built-in speed controller in its Power Cord. This allows speed adjustment to Control Airflow, Energy Consumption And Noise Level Output. 8" duct fan design and installation: this 8" fan is made from black abs plastic. This fan fits all 8" terrabloom Carbon Filters And 8" Air Ducts Seamlessly.

2 HYDROFARM ACF16 Active Air 16" Wall Mountable Oscillating Hydroponic Fans #ad - Inline fan tech specs: airflow 735 cfm, etl listed. And can be easily mounted to the ceiling of your grow tent Using Ratchet Hangers Or Zip Ties. 1 year manufacturer warranty against any manufacturing defects. 1 buy = 2 hydrofarm acf16 16" wall mountable grow fans! hydrofarm's new and improved oscillating wall mount Active Air Fan will blow you away! This easy to mount unit has 3 speed settings and oscillates 90 degrees to give you ultimate control of air flow in your area.

. This fan attaches seamlessly to all 6in TerraBloom Carbon Filters And Other Equipment With 8 Inches 200mm Duct Openings.

More information about Active Air 2 x ACF16 #ad


Similar products



Lasko Model 100 MyHeat Personal Space Heater, Black - Compact Size, Ideal for the Desk or Around the Home Office

#ad
#ad
Lasko 100 #ad - 3 speed settings. Provides safe ceramic warmth while only using budget-friendly 200 watts of power. Additional features include: ceramic heat adds quick warmth with fan-powered delivery200 watts of concentrated personal warmthCeramic heat adds quick warmth with fan-powered deliveryCompact size 8inch in line grow tent fan: use this inline fan as exhaust fan, intake fan, carbon Filter Fan or Light Fixture Cooling Fan in Your Grow Tent.

. This fan attaches seamlessly to all 6in TerraBloom Carbon Filters And Other Equipment With 8 Inches 200mm Duct Openings. Quick heat with fan delivery - makes this space heater perfect for the desktop, or counter. Once mounting bracket is screwed into the Wall, You Can Remove Central Section Of The Fan Motor Section Out Of Th.

Lasko Model 100 MyHeat Personal Space Heater, Black - Compact Size, Ideal for the Desk or Around the Home Office #ad - Helps grow healthy plants. 90° oscillating action. The controller allows to reduce the speed Of The Fan From 100% to About 50% of Max Output. Measuring just over 6" tall this handy heater is great around the house or home office. 200 watts of warmth - provides energy efficient warmth in a mini package. It weights only 5.

More information about Lasko 100 #ad


Similar products



General Hydroponics pH Control Kit

#ad
#ad
General Hydroponics 722080 #ad - And can be easily mounted to the ceiling of your grow tent Using Ratchet Hangers Or Zip Ties. Thanks to the power of ceramic heat and fan powered delivery. Built-in safety features - overheat protection ensures the space heater does not overheat even if left on for an extended amount of time. Quick heat with fan delivery - makes this space heater perfect for the desktop, or counter.

Measuring just over 6" tall this handy heater is great around the house or home office. 200 watts of warmth - provides energy efficient warmth in a mini package. If you need to remove/relocate the fan and mounting bracket From The Wall, Always Attach Supplied Mounting Bracket Indicating Airflow Direction With An Arrow to The Wall First.

This fan attaches seamlessly to all 6in TerraBloom Carbon Filters And Other Equipment With 8 Inches 200mm Duct Openings. 1 year manufacturer warranty against any manufacturing defects. 8inch in line grow tent fan: use this inline fan as exhaust fan, intake fan, carbon Filter Fan or Light Fixture Cooling Fan in Your Grow Tent.

General Hydroponics pH Control Kit #ad - This inline duct fan is not suitable For Applications with Ambient Air Temperatures Over 140°F, Current 1. 59a, power 205w, speed 2450 rpm, built-in fan motor speed controller, Hot Environment Will Deform The Impeller And Trigger Temperature Safety Sensor Causing Fan To Stop Operating. Variable fan speed control: this 8 inch inline fan is equipped with built-in speed controller in its Power Cord.

More information about General Hydroponics 722080 #ad


Similar products



DIGITEN Digital NTC 10K 3950 Waterproof Temperature Sensors Temp Silicone Probe 6 Feet2m

#ad
#ad
DIGITEN #ad - Duct dimensions: 11. 5" l x 8" w x 9" h, 7. 7 lbs. Wall installation: when installing this in line fan to a wall, click fan's legs into the mounting brackets openings. And can be easily mounted to the ceiling of your grow tent Using Ratchet Hangers Or Zip Ties. For best results, discard and replace hydroponic solution regularly.

Features: the temperature sensor is made of silicone, allow long term work with high temperature. It weights only 5. 5 lbs. The space heater also features a cool-touch exterior. Fully assembled - allows you to take the heater out of the box and have it working it minutes. Once mounting bracket is screwed into the Wall, You Can Remove Central Section Of The Fan Motor Section Out Of Th.

DIGITEN Digital NTC 10K 3950 Waterproof Temperature Sensors Temp Silicone Probe 6 Feet2m #ad - Helps grow healthy plants. 90° oscillating action. Sensor type: waterproof NTC sensor, Length: 2m, 6ft. It is high quality, seawater, high-accuracy The waterproof sensor works with water, weak acid or weak base liquid. Measurement range : -40c to 120c-40f to 248f sensor type: waterproof ntc 10k 3950 sensor sensor length: 2m, 6ft Package include: 1 x temperature sensor 8inch in line grow tent fan: use this inline fan as exhaust fan, intake fan, carbon Filter Fan or Light Fixture Cooling Fan in Your Grow Tent.

This fan attaches seamlessly to all 6in TerraBloom Carbon Filters And Other Equipment With 8 Inches 200mm Duct Openings.

More information about DIGITEN #ad


Similar products



WILLHI WH1436H Mini Plug-n-Play Digital Air Humidity Controller with Probe for Humidifier Dehumidifier Greenhouse Pets Animal Basement

#ad
#ad
WILLHI #ad - The waterproof sensor works with water, seawater, weak acid or weak base liquid. Measuring just over 6" tall this handy heater is great around the house or home office. 200 watts of warmth - provides energy efficient warmth in a mini package. 90° oscillating action. This inline duct fan is not suitable For Applications with Ambient Air Temperatures Over 140°F, Current 1.

WILLHI WH1436H Mini Plug-n-Play Digital Air Humidity Controller with Probe for Humidifier Dehumidifier Greenhouse Pets Animal Basement #ad - 59a, speed 2450 rpm, power 205w, built-in fan motor speed controller, Hot Environment Will Deform The Impeller And Trigger Temperature Safety Sensor Causing Fan To Stop Operating. Variable fan speed control: this 8 inch inline fan is equipped with built-in speed controller in its Power Cord. Contains 8oz bottle of pH down which uses food grade phosphoric acid to lower the pH to to the desired level.

The controller allows to reduce the speed Of The Fan From 100% to About 50% of Max Output. Keeps room and leaf temperatures down. It weights only 5. 5 lbs. This fan fits all 8" terrabloom Carbon Filters And 8" Air Ducts Seamlessly. Inline fan tech specs: airflow 735 cfm, etl listed.

More information about WILLHI #ad


Similar products



iPower 96"x48"x78" Hydroponic Water-Resistant Grow Tent with Removable Floor Tray for Indoor Seedling Plant Growing 4'x8'

#ad
#ad
iPower GLTENTXL1 #ad - 90° oscillating action. For best results, discard and replace hydroponic solution regularly. 1 year Warranty. Thanks to the power of ceramic heat and fan powered delivery. Built-in safety features - overheat protection ensures the space heater does not overheat even if left on for an extended amount of time.

Once mounting bracket is screwed into the Wall, You Can Remove Central Section Of The Fan Motor Section Out Of Th. Helps grow healthy plants. Remove heat from your plant with double layer ventilation ducting holes and bottom ventilation windows with removable cover. The controller allows to reduce the speed Of The Fan From 100% to About 50% of Max Output.

iPower 96"x48"x78" Hydroponic Water-Resistant Grow Tent with Removable Floor Tray for Indoor Seedling Plant Growing 4'x8' #ad - Made of silicone, it is high quality, allow long term work with high temperature, high-accuracy, . Measurement range : -40c to 120C-40F to 248F. This fan fits all 8" terrabloom Carbon Filters And 8" Air Ducts Seamlessly. Inline fan tech specs: airflow 735 cfm, etl listed. This fan attaches seamlessly to all 6in TerraBloom Carbon Filters And Other Equipment With 8 Inches 200mm Duct Openings.

This allows speed adjustment to Control Airflow, Energy Consumption And Noise Level Output. 8" duct fan design and installation: this 8" fan is made from black abs plastic.

More information about iPower GLTENTXL1 #ad


Similar products



Autopilot APC8200 CO2 Monitor & Controller with 15 Foot Remote Sensor Blue

#ad
#ad
Hydrofarm APC8200 #ad - 2-channel low drift ndir sensor precisely reads CO2 ppm levels. Once mounting bracket is screwed into the Wall, You Can Remove Central Section Of The Fan Motor Section Out Of Th. Helps grow healthy plants. 3 speed settings. Hassle-free: Tool free installation. Note: it can only be used together with our thermostat DTC102.

Improved version: simplified operation, larger power, standard U. S. Green led identification lights inform you of the unit's status at all times, not harmful to blooming plants. If you need to remove/relocate the fan and mounting bracket From The Wall, Always Attach Supplied Mounting Bracket Indicating Airflow Direction With An Arrow to The Wall First.

Autopilot APC8200 CO2 Monitor & Controller with 15 Foot Remote Sensor Blue #ad - Autopilot apc8200 co2 monitor & controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. This allows speed adjustment to Control Airflow, Energy Consumption And Noise Level Output. 8" duct fan design and installation: this 8" fan is made from black abs plastic.

Adjustable trend chart zoom levels let you trace your ppm levels. This fan fits all 8" terrabloom Carbon Filters And 8" Air Ducts Seamlessly. Inline fan tech specs: airflow 735 cfm, etl listed.

More information about Hydrofarm APC8200 #ad


Similar products



Pin-Lock MFL Dis-connect Set with Swivel Nuts 2 5/16 Gas, 1/4 Liquid Barbed by PERA

#ad
#ad
PERA #ad - This connector already has attached a special 1/4" nut that has a 5/16" hose barb attached. Once mounting bracket is screwed into the Wall, You Can Remove Central Section Of The Fan Motor Section Out Of Th. Helps grow healthy plants. The gray one connects to the co2 gas-in post on any Pin Lock home brew keg; The black one connects to the liquid-out post on any Pin Lock home brew keg.

Keeps room and leaf temperatures down. The purpose of the hose barb is to match the same barb size found on your standard Co2 Regulator. This fan attaches seamlessly to all 6in TerraBloom Carbon Filters And Other Equipment With 8 Inches 200mm Duct Openings. 1 year manufacturer warranty against any manufacturing defects.

Pin-Lock MFL Dis-connect Set with Swivel Nuts 2 5/16 Gas, 1/4 Liquid Barbed by PERA #ad - It weights only 5. 5 lbs. Hassle-free: Tool free installation. Bracket openings are different on each side allowing Fan To Install Only in 1 Direction. This fan fits all 8" terrabloom Carbon Filters And 8" Air Ducts Seamlessly. Inline fan tech specs: airflow 735 cfm, etl listed. 3 speed settings. Duct dimensions: 11.

More information about PERA #ad


Similar products



Black - Coolerguys 120mm Anti-Vibration Rubber Fan Gasket

#ad
#ad
Coolerguys 840556097976 #ad - Green led identification lights inform you of the unit's status at all times, not harmful to blooming plants. 2-channel low drift ndir sensor precisely reads CO2 ppm levels. Trend chart records co2 levels per minute, hour, day and week for accurate analysis of CO2 distribution. Note: it can only be used together with our thermostat DTC102.

Improved version: simplified operation, larger power, standard U. S. This allows speed adjustment to Control Airflow, Energy Consumption And Noise Level Output. 8" duct fan design and installation: this 8" fan is made from black abs plastic. For best results, discard and replace hydroponic solution regularly.

. 90° oscillating action. If you need to remove/relocate the fan and mounting bracket From The Wall, Always Attach Supplied Mounting Bracket Indicating Airflow Direction With An Arrow to The Wall First. Includes ph test indicator tube:fill a test-tube halfway with nutrient, add a few drops of pH Test Indicator, and observe the coloration of the liquid in the vial.

Black - Coolerguys 120mm Anti-Vibration Rubber Fan Gasket #ad - Includes 8oz bottle of pH Up which is used to elevate it to the desired level. The gray one connects to the co2 gas-in post on any Pin Lock home brew keg; The black one connects to the liquid-out post on any Pin Lock home brew keg. Fully customizable ppm deadband and CO2 set point allow flexibility in programming.

More information about Coolerguys 840556097976 #ad


Similar products