Pentek 244047 Mounting Bracket Kit for 1/4″, 3/8″ and 1/2″ Housings


Pentek 244047 - Bracket comes with mounting screws. Zinc plated steel for inside applications. The pentek 244047 is a mounting bracket used with the Slim Line Housings by Pentek. Genuine OEM. This bracket features zinc plated steel suggested for interior applications. Mounting bracket allows for the mounting of Pentek slim line water filter housings.

More information about Pentek 244047

Pentek 158110 3/8" #5 Slim Line Clear Filter Housing


Pentair Industries 3/8"#5 CL & BL W/PR 12/ - For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Slim filter housing for low-flow applications with space restrictions. The cap has 3/8" female national pipe thread Taper NPT threaded input and output connections and a nitrile butadiene rubber Buna-N O-ring to ensure a watertight seal.

Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. Initial pressure drop of 2 psi at a flow rate of 5 gpm. Maximum temperature of 125 degrees F 51. 7 degrees C. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

This filter housing is for use in various applications, and humidifying systems, including residential drinking water filtration, food service, among others. Specifications filter cartridge size H x W sold separately 5 x 2-1/2 inches 127 x 63. 5 mm initial pressure drop at 5 gpm 2 psi Maximum temperature 125 degrees F 51.

Pentek 158110 3/8" #5 Slim Line Clear Filter Housing - 7 degrees c maximum pressure 125 psi maximum dimensions h x w 7-3/8 x 4-5/8 inches 187 x 118 mmH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes.

More information about Pentair Industries 3/8"#5 CL & BL W/PR 12/


Similar products



Pentek 158117 1/4" #10 Slim Line Clear Filter Housing


Pentair Industries 1/4" #10 Slim Blue/Clear Housing - This filter housing is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others. Specifications filter cartridge size H x W sold separately 5 x 2-1/2 inches 127 x 63. 5 mm initial pressure drop at 3 gpm 2 psi Maximum temperature 125 degrees F 51.

7 degrees c maximum pressure 125 psi maximum dimensions h x w 12-1/8 x 4-5/8 inches 308 x 118 mmH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Water filters remove undesirable particles, adsorption, chemicals, and microorganisms from water by means of a semipermeable barrier, or biological processes.

They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. This pentek 158117 1/4" #10 slim line clear filter housing is suitable for low-flow applications that have space restrictions.

Pentek 158117 1/4" #10 Slim Line Clear Filter Housing - Slim filter housing for low-flow applications with space restrictions. Maximum temperature of 125 degrees F 51. 7 degrees C. It has an initial pressure drop of 2 pounds per square inch psi at a flow rate of 3 gallons per minute gpm, a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F 51.

7 degrees C.

More information about Pentair Industries 1/4" #10 Slim Blue/Clear Housing


Similar products



Pentek C2 Carbon-Impregnated Cellulose Filter Cartridge, 4-7/8" x 2-1/2", 5 Micron


Pentair Industries C2 - For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Initial pressure drop of 2 psi at a flow rate of 5 gpm. Use with a 10" x 2-1/2" sediment or carbon filter cartridge sold separately. They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

Initial pressure drop of 2 psi at a flow rate of 3 gpm. Water filters are used in a wide range of applications, swimming pools, including drinking water purification, industrial processes, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems.

Pentek C2 Carbon-Impregnated Cellulose Filter Cartridge, 4-7/8" x 2-1/2", 5 Micron - The filter will reduce free available chlorine FAC at 2 parts per million ppm by at least 75% in up to 1, 250 gallons at a flow rate of 05 gallons per minute gpm. Slim filter housing for low-flow applications with space restrictions. Nominal filtration rating of 5 microns. Maximum temperature of 125 degrees F 51.

7 degrees C.

More information about Pentair Industries C2


Similar products



Hydronix HF2-10CLWH12 10" Clear Body, White Flat Cap 1/2"


Hydronix HF2-10CLWH12 - They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization. The company, founded in 2010, is headquartered in Chino Hills, CA. Temperature range of 40 to 125 degrees F 4.

4 to 51. 7 degrees C. Initial pressure drop of 2 psi at a flow rate of 5 gpm. Reduces fine sediment and chlorine taste and odor in residential drinking water. Slim filter housing for low-flow applications with space restrictions. Housing for water filter cartridge. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition.

Hydronix HF2-10CLWH12 10" Clear Body, White Flat Cap 1/2" - Meets ansi/nsf standard 42 certification for material requirements only. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. Initial pressure drop of 2 psi at a flow rate of 3 gpm. It has a maximum temperature of 125 degrees F and a maximum pressure rating of 75 pounds per square inch psi.

Maximum pressure rating of 75 psi.

More information about Hydronix HF2-10CLWH12


Similar products



Hydronix SDC-25-0501 NSF Sediment Filter 2.5" OD X 4 7/8" Length, 1 Micron


Hydronix SDC-25-0501 - The performance of filters is measured by the minimum particle size that is blocked, the maximum flow rate, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

Meets ansi/nsf standard 42 certification for material requirements only. Water filters are used in a wide range of applications, including drinking water purification, and irrigation, industrial processes, swimming pools, among others. Hydronix water technology is a supplier of water filtration, purification and separation products.

Hydronix SDC-25-0501 NSF Sediment Filter 2.5" OD X 4 7/8" Length, 1 Micron - The company, is headquartered in Chino Hills, founded in 2010, CA. Housing for water filter cartridge. This hydronix sdc-25-0501 polypropylene sediment filter has a particle retention size of 1 micron and is used in a water filtration system. Meets ansi/nsf standard 42 certification and FDA approval, for material requirements only.

Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Particle retention size of 1 micron. Slim filter housing for low-flow applications with space restrictions.

More information about Hydronix SDC-25-0501


Similar products



Pentek PENTEK-158623 Clear 3G Filter Housing


Commercial Water Distributing 1/2" 3G Slim Line NPT - 2. 5" od and an overall length of 4-7/8". Particle retention size of 1 micron. Use with a 5" x 2-1/2" sediment or carbon filter cartridge sold separately. Meets ansi/nsf standard 42 certification and FDA approval, for material requirements only. 10" long body and 1/2" port connection. San body and polypropylene cap with buna-n O-ring seal.

Initial pressure drop of 2 psi at a flow rate of 2 gpm. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Housing for water filter cartridge. The standard size gives the user a wide selection of filters to choose from. Maximum temperature of 125 degrees F 51. 7 degrees C. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition.

Pentek PENTEK-158623 Clear 3G Filter Housing - Sediment filter for a water filtration system. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. Nominal filtration rating of 5 microns. 1/2 inch female pipe Thread inlet outlet.

More information about Commercial Water Distributing 1/2" 3G Slim Line NPT


Similar products



Pentek 150578 MC-1A Bracket for 3/4" 3G Filter Housings


Pentair Industries 150578 - Mounting bracket for filter housings. It is made of strong metal. Slim filter housing for low-flow applications with space restrictions. Use with a 10" x 2-1/2" sediment or carbon filter cartridge sold separately. This pentek 150578 mc-1a bracket is used to mount filter housings on a vertical surface. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition.

Initial pressure drop of 2 psi at a flow rate of 2 gpm. Use with pentek #10 and #20 3/4" 3G MB housings. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. Maximum temperature of 125 degrees F 51. 7 degrees C. The performance of filters is measured by the minimum particle size that is blocked, the maximum flow rate, the downstream concentration of unwanted chemicals, the percentage of particles or microorganisms that are removed, and the amount of water that can be filtered before the filter must be replaced.

Pentek 150578 MC-1A Bracket for 3/4" 3G Filter Housings - Use with a 5" x 2-1/2" sediment or carbon filter cartridge sold separately. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Pressure relief valve for convenient filter changes. San body and polypropylene cap with buna-n O-ring seal.

They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization.

More information about Pentair Industries 150578


Similar products



Anderson Metals 759106-04 1/4-Inch by 1/4-Inch Straight Needle Valve, Brass


Anderson Metals Corp., 759106-04 - Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. Use with pentek #10 and #20 3/4" 3G MB housings. Particle retention size of 1 micron. Reduces fine sediment and chlorine taste and odor in residential drinking water. Our capabilities for manufacturing include both standard off-the-shelf items and custom run parts.

Meets ansi/nsf standard 42 certification for material requirements only. Pressure relief valve for convenient filter changes. Initial pressure drop of 2 psi at a flow rate of 3 gpm. The product is 1/4x1/4 Needle Valve. Use with a 5" x 2-1/2" sediment or carbon filter cartridge sold separately. Anderson metals is a family-owned and operated manufacturer of brass fittings, valves and pipe nipples based in Kansas City, MO since 1951.

Anderson Metals 759106-04 1/4-Inch by 1/4-Inch Straight Needle Valve, Brass - Housing for water filter cartridge. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Straight needle valve. Mounting bracket for filter housings.

More information about Anderson Metals Corp., 759106-04


Similar products



Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief


Pentair Industries 3/4" #10 Blue/PR Mounting Cap - 1/2 inch female pipe Thread inlet outlet. Standard filter housing for residential, commercial, and industrial applications. It has an initial pressure drop of 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F 51.

7 degrees C. Holds a 10" x 2-1/2" sediment or carbon filter cartridge sold separately. Clear sump for easy filter inspection. The housing can be used with a 10" x 2-1/2" sediment or carbon filter cartridge sold separately. 2. 5" od and an overall length of 4-7/8". Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants.

Pentek 150071 3/4" #10 Standard Clear Filter Housing with Pressure Relief - Nominal filtration rating of 5 microns. Initial pressure drop of 2 psi at a flow rate of 3 gpm. Initial pressure drop of 2 psi at a flow rate of 5 gpm. Easy and simple use kit. This filter housing meets national sanitation foundation/american National Standards Institute NSF/ANSI standard 42 for quality assurance, and humidifying systems, and is for use in various applications, food service, including residential drinking water filtration, among others.

Specifications filter cartridge size H x W sold separately 10 x 2-1/2 inches 254 x 63.

More information about Pentair Industries 3/4" #10 Blue/PR Mounting Cap


Similar products



Pentek CBC-5 Carbon Block Filter Cartridge, 40 to 180 degrees F


Pentek CBC-5 - Made of Brass. Use with pentek #10 and #20 3/4" 3G MB housings. Meets ansi/nsf standard 42 certification for material requirements only. Pressure relief button for easier cartridge replacement. Initial pressure drop of 2 psi at a flow rate of 5 gpm. Reduces fine sediment and chlorine taste and odor in residential drinking water.

Mounting bracket for filter housings. 10" long body and 1/2" port connection. Use with a 10" x 2-1/2" sediment or carbon filter cartridge sold separately. Temperature range of 40 to 125 degrees F 4. 4 to 51. 7 degrees C. Maximum temperature of 125 degrees F 51. 7 degrees C. Clear sump for easy filter inspection. Meets ansi/nsf standard 42 certification and FDA approval, for material requirements only.

Pentek CBC-5 Carbon Block Filter Cartridge, 40 to 180 degrees F - The pentek cbc-10 carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Filtration Rating: 05 micron. Made of strong metal.

More information about Pentek CBC-5


Similar products