Simpson Strong Tie FPBB44 Black Powder-Coated 12-Gauge E-Z Base

#ad
#ad
Simpson Strong Tie FPBB44 #ad - Material: 12 gauge finish: black powder coat allows easy installation of 4x4 wood posts on existing concrete Attach post to E-Z Spike or E-Z Base with 8-1/4" SDS screws or 1/4" HDG lag screws Attach post to E-Z Mender using 6 HDG nails or screws per part. Allows easy installation of 4x4 wood posts on existing concrete.

Allows easy installation of 4 x 4 wood posts on existing concrete. Replacing an entire fence can be an expensive and difficult task. Made from 12 gauge steel. Diameter anchors. Install with 1/4 in. Hdg lag screws. Easy to install in concrete with 1/2 in. Sds screws or 1/4 in. Black Powder-Coat. Simpson strong-tie offers a line of products designed to help make repairing and reinforcing fence posts easy and economical.

More information about Simpson Strong Tie FPBB44 #ad

DEWALT DW5437 1/2-Inch x 4-Inch x 6-Inch ROCK CARBIDE SDS Plus Hammer Bit

#ad
#ad
Dewalt DW5437 #ad - Dewalt dw5437 1/2-inch x 4-inch x 6-inch rock carbide sds plus Hammer Bit Rock carbide tip for Longer Bit Life. Increased Steel Prevents Breakage. Elongated four Flute Helix for Faster Material Removal. For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter.

More information about Dewalt DW5437 #ad


Similar products



5 Count Simpson Strong-Tie FPBB44 E-Z Base

#ad
#ad
Simpson Strong-Tie FPBB44 #ad - Attach the e-z Base to the existing concrete using suitable anchors. Elongated four Flute Helix for Faster Material Removal. Increased Steel Prevents Breakage. Allows easy installation of 4x4 wood posts on existing concrete. Designed to help make repairing and reinforcing fence posts easy and economical. Fasten the post to the base using double-barrier coat or hot-dip galvanized SDS screws or lag screws screws and anchors not supplied.

5 Count Simpson Strong-Tie FPBB44 E-Z Base #ad - For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter. Simpson strong tie fpbb44 e-z base 4x4 post base with Black Powder Coat Finish - Allows easy installation of 4x4 wood posts on existing concrete. Black powder Coat Finish. Easy to install in concrete with 1/2" diameter anchors.

12 gauge Material. Rock carbide tip for Longer Bit Life.

More information about Simpson Strong-Tie FPBB44 #ad


Similar products



Simpson Structural Screws SDS25112-R25 1/4-Inch by 1-1/2-Inch with 1-Inch threaded Structural Wood Screw, 25-Pack

#ad
#ad
simada seisakuzyo SDS25112-R25 #ad - 12 gauge Material. Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification. Increased Steel Prevents Breakage. Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting. 3/8-inch hex head. Easy to install in concrete with 1/2" diameter anchors.

Meets icc-es esr-2236 codes. Designed to help make repairing and reinforcing fence posts easy and economical. Allows easy installation of 4x4 wood posts on existing concrete. Low speed 1/2" drill with a 3/8" hex Driver Is The Recommended Tool For Installation. Designed for installation in Simpson Strong Tie Connectors As Well As Wood To Wood Applications.

Simpson Structural Screws SDS25112-R25 1/4-Inch by 1-1/2-Inch with 1-Inch threaded Structural Wood Screw, 25-Pack #ad - Black powder Coat Finish. For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter. 25 pack, 1. 5", strong drive sds structural wood screws, identification stamped into the head with length, double barrier coating for Exterior & Treated-Wood Applications, Designed For Installation In Simpson Strong Tie Connectors As Well As Wood To Wood Applications, Low Speed 1/2" Drill With A 3/8" Hex Driver Is The Recommended Tool For Installation.

Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation.

More information about simada seisakuzyo SDS25112-R25 #ad


Similar products



The Hillman Group 370988 Wedge Anchor, 1/2 X 3-3/4-Inch, 12-Pack

#ad
#ad
The Hillman Group 370988 #ad - Suitable base materials are normal-weight and sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. Elongated four Flute Helix for Faster Material Removal. The power-stud+ sd1 is a fully threaded, torque controlled, wedge expansion anchor that is designed for concrete applications.

Suitable base materials are normal-weight, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. Common applications include structural connections such as beam and column anchorage. Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification. Black powder Coat Finish.

The Hillman Group 370988 Wedge Anchor, 1/2 X 3-3/4-Inch, 12-Pack #ad - Strong drive SDS Structural Wood Screws. Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation. Designed to help make repairing and reinforcing fence posts easy and economical. For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter.

3/8-inch hex head. Meets icc-es esr-2236 codes. Increased Steel Prevents Breakage.

More information about The Hillman Group 370988 #ad


Similar products



Bosch HC2081 1/2 In. x 6 In. SDS-plus Bulldog Rotary Hammer Bit

#ad
#ad
Bosch HC2081 #ad - Wear mark alerts user when tip wears beyond ANSI specification. Carbide tipped for long life in tough applications. 12 pieces per retail package. Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation. Suitable base materials are normal-weight, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry.

Common applications include structural connections such as beam and column anchorage. Low speed 1/2" drill with a 3/8" hex Driver Is The Recommended Tool For Installation. For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter. Elongated four Flute Helix for Faster Material Removal.

Bosch HC2081 1/2 In. x 6 In. SDS-plus Bulldog Rotary Hammer Bit #ad - Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification. 12 gauge Material. 15-percent faster compared to S4L. Ideal for anchoring and through-hole applications in concrete. 3/8-inch hex head. Easy to install in concrete with 1/2" diameter anchors. Proprietary Bosch hardening process results in more holes per bit.

More information about Bosch HC2081 #ad


Similar products



CONFAST 1/2" x 4-1/4" Hot-Dipped Galvanized Wedge Anchor Box of 25

#ad
#ad
CONFAST #ad - Suitable base materials are normal-weight, concrete over steel deck, sand-lightweight concrete, and grouted concrete masonry. Common applications include structural connections such as beam and column anchorage. Proprietary Bosch hardening process results in more holes per bit. 15-percent faster compared to S4L.

Black powder Coat Finish. This anchor is designed for use in Concrete only, and should never be used in block or brick base material. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Diameter of anchor The diameter of the anchor is 1/2". Length anchor the length of the anchor is 4-1/4"Thread LengthThe length of the threads on the anchor is 2-3/4" in length.

CONFAST 1/2" x 4-1/4" Hot-Dipped Galvanized Wedge Anchor Box of 25 #ad - Minimum embedmentthe minimum anchor embedment into the concrete is 2-1/4". Bosch-made carbide tip is tougher and more durable under heavy loads. B>hot dipped galvanized - helps prevent rusting in moist environments. Elongated four Flute Helix for Faster Material Removal. B>packaged with nuts and washers - fast, quick, complete installation.

For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter.

More information about CONFAST #ad


Similar products



Simpson Strong Tie Wa50234 1/2-Inch by 2-3/4-Inch with 1-5/16-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 25-Piece

#ad
#ad
Anchor Fasteners WA50234 #ad - 12 gauge Material. Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation. One piece wrap around clip. 15-percent faster compared to S4L. Designed to help make repairing and reinforcing fence posts easy and economical. Suitable base materials are normal-weight, concrete over steel deck, sand-lightweight concrete, and grouted concrete masonry.

Common applications include structural connections such as beam and column anchorage. Increased Steel Prevents Breakage. Proprietary Bosch hardening process results in more holes per bit. Threaded end is chamfered for ease of starting nut. Rock carbide tip for Longer Bit Life. The wedge-all wedge anchors are a non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout-filled concrete masonry.

Simpson Strong Tie Wa50234 1/2-Inch by 2-3/4-Inch with 1-5/16-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 25-Piece #ad - A one-piece clip ensures uniform holding capacity that increases as tension is applied. Designed for installation in Simpson Strong Tie Connectors As Well As Wood To Wood Applications. Elongated four Flute Helix for Faster Material Removal. Bosch-made carbide tip is tougher and more durable under heavy loads.

For use with electric or cordless rotary hammers.

More information about Anchor Fasteners WA50234 #ad


Similar products



Simpson Strong Tie Wa50414 1/2-Inch by 4-1/4-Inch with 2-13/16-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 25-Piece

#ad
#ad
Anchor Fasteners WA50414 #ad - One piece wrap around clip. B>hot dipped galvanized - helps prevent rusting in moist environments. Threaded end is chamfered for ease of starting nut. Easy to install in concrete with 1/2" diameter anchors. Suitable base materials are normal-weight, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry.

Common applications include structural connections such as beam and column anchorage. Designed to help make repairing and reinforcing fence posts easy and economical. Threaded end is chamfered for ease of starting nut. Ideal for anchoring and through-hole applications in concrete. 3/8-inch hex head. Optimized brazing and hardening process for long life.

Simpson Strong Tie Wa50414 1/2-Inch by 4-1/4-Inch with 2-13/16-Inch Thread Length Zinc Plated Steel Wedge-All Anchor, 25-Piece #ad - Rock carbide tip for Longer Bit Life. 12 gauge Material. Elongated four Flute Helix for Faster Material Removal. Increased Steel Prevents Breakage. Length identification head marks. One piece wrap around clip. For use with electric or cordless rotary hammers.

More information about Anchor Fasteners WA50414 #ad


Similar products



Simpson Strong-Tie Ez Base 4" X 4" 12 Ga

#ad
#ad
Simpson Strong-Tie FPBB44 #ad - One piece wrap around clip. Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation. B>hot dipped galvanized - helps prevent rusting in moist environments. Patented 4-cut point and type 17 point enables easy driving without pre-drilling and minimalm splitting. Easy to install in concrete with 1/2" diameter anchors.

Threaded end is chamfered for ease of starting nut. Increased Steel Prevents Breakage. Designed to help make repairing and reinforcing fence posts easy and economical. 15-percent faster compared to S4L. Designed for installation in Simpson Strong Tie Connectors As Well As Wood To Wood Applications. Allows easy installation of 4x4 wood posts on existing concrete.

Simpson Strong-Tie Ez Base 4" X 4" 12 Ga #ad - Ez retro fit, fence post base, attach post to e-z spike or e-z base with 8-1/4" sds screws or 1/4" hdg lag screws, allows Easy Installation Of 4x4 Wood Posts On Existing Concrete, Attach Post To E-Z Mender Using 6 HDG Nails Or Screws Per Part. Anchor can be installed through standard fixture holes. Easy to install in concrete with 1/2" diameter anchors.

Head is stamped with Simpson Strong Tie Stamp and fastener length for easy identification. Bosch-made carbide tip is tougher and more durable under heavy loads.

More information about Simpson Strong-Tie FPBB44 #ad


Similar products



CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated Box of 25

#ad
#ad
CONFAST #ad - For use with electric or cordless rotary hammers. Used for drilling holes in poured concrete and other masonry up to 1-1/8" diameter. Therefore, the anchor must be installed so that a minimum of 2-1/4" of the anchor is embedded into the concrete. Maximum fixture thicknessthe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-3/4".

One piece wrap around clip. Length identification head marks. B>hole size is anchor size - simplicity and ease of installation. Low speed 1/2-inch drill with 3/8-Inch hex driver recommended for installation. The 1/2" diameter anchor requires the hole in the fixture to be 5/8". Torque valueto be set properly in the concrete, the anchor must be torqued to between 50 - 60 ft.

CONFAST 1/2" x 5-1/2" Wedge Anchor Zinc Plated Box of 25 #ad - Lbs. Spacing between anchorseach anchor must be spaced a minimum distance of 5" from each other when measured center to center. Edge distanceit is very important not to install the anchor any closer than 2-1/2" from an unsupported edge of the concrete. Strong drive SDS Structural Wood Screws. This will ensure that the minimum embedment of 2-1/4" will be met.

Fixture hole diameterthe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor.

More information about CONFAST #ad


Similar products