As an Amazon Associate I earn from qualifying purchases.
BIG RED #ad - Foam bumper on the handle helps protect your vehicle from damage. Lifting range from 3. 5" to 14" allows you can gain easy access under low-profile vehicles. Racing floor jack can be used for general or specialty use and features a 1.
Jack Boss #ad - Steel casters and swivel front casters for easy maneuverability, sturdy handle for convinient carrying. Quick liftingheavy duty jack with dual piston enable you to easily pump the jack to the desired height. Large rubber saddle also help protect your vehicle.
Capacityaluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max. Dimensions:28. 3" l x 13. 7"w x 7. 8"h. Floor jack is used for most Sedans, travel trailer, MPV, SUV, station wagon, mini bus.
Low profilethe high performance floor jack with low profile design of 3-15/16" min. Lifting height allow you to get underneath a low vehicle, suitable for low ground clearance vehicle. Safety and after-salesour floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease. Meets ansi/asme paSE safety standards. Includes a limited 1 year manufacturer warranty.
ARCAN #ad - Reinforced lift arm: Increases Strength, Chassis Torsion Control, And Durability. Side-mount handle: Allows for convenient jack positioning. Dual pump pistons: quickly Raises The Floor Jack Saddle To Load. Complies with asme pase-2019 safety standard: We put all of our lifting equipment through a voluntary and rigorous safety certification process.
Torin #ad - 7 strokes to maximum height. Minimum lift height: 3-15/16" inches. Removable saddle. Quick lift design. Maximum lift height: 18-5/16" inches.
Sunex Tools #ad - Thick frame side plates and reinforced lift arm for added strength, chassis torsion control and durability. 2 piece handle with bumper pad.
BILT HARD #ad - Lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground. To 14-1/4 in. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most.
Lifting capacity with 3-1/8 in. The sapphire anodized finish on the surface also makes it rust and corrosion resistant. Rapid pump: the high performance low profile car jack has a exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It also has a universal joint release mechanism for controlled descents of your load from any handle position.
Warranty: meets international quality standards. 1 year free-return guarantee, don't hesitate to call us if you have any questions, Bilt Hard support team is on standby for YOU. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it. Easy operation: the 1. 5 ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position.
JEGS #ad - Optional jack skid available separately to use safely on dirt, gravel, and grass. Lightweight aluminum construction allows you to roll jack around with ease.
ARCAN #ad - Lifting capacity: 4, 000 lbs. Lightweight aircraft-grade aluminum: Allows for easy maneuverability. Vehicle protection: Designed with a rubber saddle and a foam handle bumper.
Bypass and overload valves: Prevents over-extension of hydraulic ram and jack use beyond rated capacity. 2 piece handle: Allows for easy storage. Side-mount handle: Allows for convenient jack positioning.
Sunex Tools #ad - Thick frame side plates and reinforced lift arm for added strength, chassis torsion control and durability. Wide track wheels for easy maneuverability.
Torin #ad - Foam bumper on the handle helps protect your vehicle from damage; Convenient side handle makes it easy to carry. Racing floor jack can be used for general or specialty use and features a 1. 5 ton 3, 000 lb capacity.
1. BIG RED
#adBIG RED T815016L Torin Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump, 1.5 Ton 3,000 lb Capacity, Blue
#adMore information #ad
5 ton 3, 000 lb capacity. Constructed of durable, making it easy to carry. It has a machined, high-strength aluminum and steel; Equipped with a handy side handle, non-slip knurled handle.| Brand | BIG RED #ad |
| Manufacturer | Torin #ad |
| Height | 23.5 Inches |
| Length | 7 Inches |
| Width | 11.25 Inches |
| Part Number | T815016L |
| Model | T815016L |
| Warranty | Limited Manufacturer Warranty |
More information #ad
2. Jack Boss
#adJack Boss 3 ton Hydraulic Aluminum car Floor Jack,6600 lbs Capacity,Low Profile Lightweight Quick Lift Trolley Jack with Dual Piston
#adCapacityaluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max. Dimensions:28. 3" l x 13. 7"w x 7. 8"h. Floor jack is used for most Sedans, travel trailer, MPV, SUV, station wagon, mini bus.
More information #ad
Package contains rubber saddle and two piece handle. Durable material and easy operationfloor jack constructed of aluminum billet and welded steel frame assures high strength and duablility. Low profilethe high performance floor jack with low profile design of 3-15/16" min. Lifting height allow you to get underneath a low vehicle, suitable for low ground clearance vehicle. Safety and after-salesour floor jacks are professionally tested to fully ensure the safety of each user and can be used at ease. Meets ansi/asme paSE safety standards. Includes a limited 1 year manufacturer warranty.
| Brand | Jack Boss #ad |
| Manufacturer | Torin #ad |
| Weight | 58.5 Pounds |
| Part Number | a-1 |
| Model | AS830011L |
| Warranty | a limited 1 year manufacturer warranty |
More information #ad
3. ARCAN
#adArcan 3-Ton Quick Rise Aluminum Floor Jack with Dual Pump Pistons & Reinforced Lifting Arm A20018
#adMore information #ad
Lifting range: has a low height of 3. 75” and a high height of 18”. Lightweight aircraft-grade aluminum: Allows For Easy Maneuverability. Lifting capacity: 6, 000 lbs.| Brand | ARCAN #ad |
| Manufacturer | Arcan #ad |
| Height | 8 Inches |
| Length | 30 Inches |
| Weight | 56 Pounds |
| Width | 13.5 Inches |
| Part Number | A20018 |
| Model | A20018 |
| Warranty | 1 Year |
More information #ad
4. Torin
#adBlack, 2.5 Ton 5,000 lb Capacity, Torin T84025B Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump
#adMore information #ad
| Brand | Torin #ad |
| Manufacturer | Torin Shop Equipment #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 60 Pounds |
| Width | 0 Inches |
| Part Number | T84025B |
| Model | T84025B |
| Warranty | Limited 1 year manufacturer warranty |
More information #ad
5. Sunex Tools
#adNOS NSJ0301 3-Ton Aluminum Service Jack
#adMore information #ad
Ultra lightweight aluminum construction at just 58-Pound. Height range: 3. 75 in to 18. 125 in. Safety valve prevents overloading. Lift capacity: 3 Tons 6, 000-Pound.| Brand | Sunex Tools #ad |
| Manufacturer | NOS #ad |
| Height | 6.6 Inches |
| Length | 28.7 Inches |
| Weight | 0.03 Pounds |
| Width | 13 Inches |
| Part Number | NSJ0301 |
| Model | NSJ0301 |
| Warranty | 1 Year |
More information #ad
6. BILT HARD
#ad1.5 Ton Capacity 3,000 lb, BILT HARD Aluminum and Steel Floor Jack, Low Profile Hydraulic Racing Floor Jack with Dual Piston Rapid Pump, Blue
#adLifting capacity with 3-1/8 in. The sapphire anodized finish on the surface also makes it rust and corrosion resistant. Rapid pump: the high performance low profile car jack has a exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It also has a universal joint release mechanism for controlled descents of your load from any handle position.
More information #ad
Durable but lightweight: bilt hard hydraulic floor jack features industrial quality for professional mechanics and hardcore. Warranty: meets international quality standards. 1 year free-return guarantee, don't hesitate to call us if you have any questions, Bilt Hard support team is on standby for YOU. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it. Easy operation: the 1. 5 ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position.
| Brand | BILT HARD #ad |
| Manufacturer | BILT HARD #ad |
| Height | 5.25 Inches |
| Length | 22.5 Inches |
| Weight | 35.1 Pounds |
| Width | 9.88 Inches |
| Part Number | JA-Floor15-AS-SFP |
| Model | B0BGMY5XCM |
| Warranty | 1 YEAR |
More information #ad
7. JEGS
#adJEGS Professional Low-Profile 3-Ton Aluminum Floor Jack | 3 ½ Inch Minimum Saddle Height | Lightweight Construction | 360 Degree Rotating Saddle
#adMore information #ad
360 degree rotating saddle allows for easier movement. Low profile design lifts from 3 ½ to 19 ¼ inches. Rubber lift pad prevents marring of surfaces.| Brand | JEGS #ad |
| Manufacturer | JEGS #ad |
| Height | 7.5 Inches |
| Length | 31.6 Inches |
| Weight | 58 Pounds |
| Width | 14.5 Inches |
| Part Number | 80077 |
More information #ad
8. ARCAN
#adArcan 2-Ton 4,000 lbs. Quick Rise Aluminum Floor Jack with Dual Pump Pistons & Reinforced Lifting Arm A20017
#adBypass and overload valves: Prevents over-extension of hydraulic ram and jack use beyond rated capacity. 2 piece handle: Allows for easy storage. Side-mount handle: Allows for convenient jack positioning.
More information #ad
Reinforced lift arm: Increases strength, chassis torsion control, and durability. Dual pump pistons: Quickly raises the floor jack saddle to load. Complies with asme pase-2019 safety standard: We put all of our lifting equipment through a voluntary and rigorous safety certification process.| Brand | ARCAN #ad |
| Manufacturer | Arcan #ad |
| Height | 7.5 Inches |
| Length | 30 Inches |
| Weight | 50.4 Pounds |
| Width | 14 Inches |
| Part Number | A20017 |
| Model | A20017 |
| Warranty | 1 Year |
More information #ad
9. Sunex Tools
#adSunex 6603ASJ 3 Ton Aluminum Lift
#adMore information #ad
Rubber saddle pad and foam bumper pad protect vehicle. Side mounted handles for easy jack positioning. Rapid rise technology reaches max height of 19. 3 inches in 7. 5 pumps.| Brand | Sunex Tools #ad |
| Manufacturer | Sunex #ad |
| Height | 31.7 Inches |
| Length | 15 Inches |
| Weight | 58 Pounds |
| Width | 7.87 Inches |
| Part Number | 6603ASJ |
| Model | 6603ASJ |
More information #ad
10. Torin
#ad1.5 Ton 3,000 lb Capacity, Torin TAM815016L Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump, Black
#adMore information #ad
Lifting range from 3-1/2" to 14-1/8" allows you can gain easy access under low-profile vehicles. Constructed of durable, high-strength aluminum and steel; Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height.| Brand | Torin #ad |
| Manufacturer | Torin #ad |
| Height | 8.2 Inches |
| Length | 24.7 Inches |
| Width | 13.2 Inches |
| Part Number | TAM815016L |
| Model | TAM815016L |
| Warranty | Limited 1 year manufacturer warranty |
More information #ad
