As an Amazon Associate I earn from qualifying purchases.
SMALLRIG #ad - It also has rubber pads on the bottom to prevent scratching. Multiple mounting pointsthe cage has a locating hole for arri standard, 1/4”-20 threaded holes and cold shoe on the top, where you can attach top handle 2165. Anti-twist & anti-scratchthe cage firmly locks via threaded holes on the top and bottom to prevent twisting.
Full access designthe form-fitting cage does not block ports, card slots, vents and battery doors. The holes at the top-right corner and bottom-left corner can attach the follow focus rod clamp. Upgraded for bmpcc 6k pro / 6k g2smallrig full cage advanced version 3517 is specifically designed for BMPCC 6K Pro / 6K G2 to fit its original battery grip.
Moreover, there is a built-in screwdriver on the bottom of the cage for the assembly. There are multiple threaded holes on the bottom for mounting quick-release plates like 1280, 2146, and original plate for Arca of RS 2 / RS 3 / RSC 2 / RS 3 Pro. Its right side is ergonomically designed for a comfortable grip experience. The cage comes with shoulder strap holes on the top of each side for a shoulder strap or other accessories.
SMALLRIG #ad - Featured recommendationscompatible with ronin s and crane 2. Nato railfeatures built-in nato rail that allows you to quickly release accessories with NATO clamp. Not for 6k pro!!!!!!!high customizationsmallrig bmpcc cage is specifically designed for blackmagic design pocket cinema Camera 4K & 6K, it would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot.
It could be used on djI Ronin S or Zhiyun Crane 2 gimbal stabilizer. Perfect protectionsecure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting.
Mounting smallrig side Handle - 2187 for hand-held shooting. Mutiple moutingsthis cage comes with multiple mounting points, allow you to attach more accessories, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, like microphone or SmallRig Articulating Arm – 2070, etc.
Tilta #ad - Record to ssd via the drive holder for T5 and Mountable USB-C Cable. Top & side handles provide more Flexibility When Operating and Handling. Mount accessories via cold shoe, 1/4"-20 and 3/8"-16 Threads.
SMALLRIG #ad - Featured recommendationsit could attach swivel and tilt adjustable mount/holder 2903 & 2904 for the monitor. Anti-twist functionhighly secure via a 1/4"-20 screw on the top and two on the bottom to prevent wiggles and comes with rubber pads at the bottom to prevent scratching. It would not block any buttons on the camera.
Bottom structuresmallrig cage 3270 incorporates multiple threaded holes on the bottom to attach Quick Release Plates 1280 & 2146 and RS2 stabilizer and a built-in spanner for easy disassembly. Multiple mounting pointsit is equipped with multiple mounting points, such as 1/4" & 3/8" threaded holes, cold shoes, allowing you to connect more accessories such as SmallRig Quick Release Nato Rail 1409 and Smallrig Top Handle 2362, nato rail and locating holes for arri, etc.
It can also be disassembled and used as a half cage. Lightweight design with only 300g, the cage is made of aluminum alloy, with matte surface and strong oxygen resistance. It could be mounted with hdmi & usb-c cable clamp 3271 and T5 SSD Mount 3272 to improves compactness. Locating holes for arri on the top are compatible with Top Handle 2165 for handheld shooting, or it could be mounted with NATO Rail Handle 2270 & 2187 for better shooting. For bmpcc 6k pro / 6k g2smallrig full cage 3270 is specially designed for bmpcc 6k pro / 6k g2.
SMALLRIG #ad - It can be fixed via one thumb screw to protect SSD USB-C cable and prevent disconnection during shooting. A great 6-in-1 setup for professional shooting!smallrig professional cage kit 3584, top handle, side handle, ssd mount, 15mm baseplate, which comes with a cage, HDMI cable clamp, is a great idea for professional shooting.
The cage kit comes with multiple 1/4"-20 threaded holes to support other accessories. What you get1 x cage; 1 x t5 ssd & usb-c cable clamp; 1 x cable clamp; 1 x top handle; 1 x baseplate with dual rod; 1 x NATO Side Handle; 6 x 1/4”-20 Screw; 1 x 3/8”-16 Screw; 2 x Allen Wrench.
Fits for 15mm riser systemthe cage kit comes with a study and dual rod clamp with a standard 15mm rod hole, which suits 15mm dual rod, and is ideal for mounting Follow Focus 3010 and Matte Box 2660 or Mini Matte Box 3196 for easy and quick focus control in video shooting. Ssd mount includedcomes with a universal ssd mount for samsung T5/T7 SSD.
Tilta #ad - Made for both the bMPCC 4K and new 6K. Protects, ssd holder, adds handling options, and more. Modular "tiltaing" design allows you to mix and match parts to build the perfect rig.
SMALLRIG #ad - Mounting pointssmallrig 2419 features multiple mounting points including nato rail, locating holes for arri, 1/4"-20 & 3/8"-16 holes, and Cold Shoe Mount. The cage rig for bmpcc 4k & 6k is locked by 1/4”- 20 screws on both the top and bottom, with additional locating pins and rubber pads on the base plate preventing wiggles or scratches.
Top recommendationwhen working with the camera field monitors, you could fix it to the top of cage kit 2419 with SMALLRIG Monitor Mount 1842. Original designsmallrig cage kit for blackmagic design pocket cinema camera 4k & 6k includes an integrated full cage, a top handle, and an SSD holder.
Mount for samsung t5 ssdthe ssd holder is fixed to the cage by two screws, securing the T5 SSD and protecting the USB-C cable. For handheld shootingthis top handle from smallrig features a shoe mount for microphone and led lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. This is a basic and light handheld kit for BMPCC 4K & 6K users. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft.
Tilta #ad - Arca compatible bottom plate allows for Quick Mounting to the DJI RS 2. Half or full detachable design Allows More Flexibility in Different Shooting Situations. Protective armor for bmpcc 6k pro minimizes Wear and Tear Over Time.
SMALLRIG #ad - Screen protectthe sunhood 3327 is easily removable and does not interfere with the flip of the screen, hence a better screen display under strong outdoor light. Featuring with multiple 1/4"-20 threaded holes that support additional camera accessories. The package include camera cage 3270/top handle 2362/side handle 2187/sunhood 3273/SSD Cable Clamp 3300/HDMI Cable Clamp 3271/NATO Rail 2172/Screen Protector 3274.
For bmpcc 6k pro / 6k g2smallrig camera accessory kit 3299 is specially designed for bmpcc 6k pro / 6k g2. Besides, the kit provides two pieces of tempered films that can be easily pasted onto the screen via electrostatic adsorption to protect the screen.
The built-in mount for t5 ssd takes up very little space and improves compactness and suits SSD & USB-C cable clamp to ensure stability and smooth data transmission while shooting. Nato top handle & side handlethe nato top handle 2362 can rotate 360 degrees and secures to any cage with nato rail on the top or side, and features multiple 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The nato side handle 2187 fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly.
1. SMALLRIG
#adSmallRig Full Cage for BMPCC 6K Pro / 6K G2, Locating Holes for ARRI and NATO Rail, 3517, Compatible with Blackmagic Pocket Camera Battery Grip, Comes with Built-in Removable Pogo Pin Connector
#adFull access designthe form-fitting cage does not block ports, card slots, vents and battery doors. The holes at the top-right corner and bottom-left corner can attach the follow focus rod clamp. Upgraded for bmpcc 6k pro / 6k g2smallrig full cage advanced version 3517 is specifically designed for BMPCC 6K Pro / 6K G2 to fit its original battery grip.
More information #ad
Facilitate power supplywhen the cage works with the removable Pogo Pin connector, it can be directly attached to the original battery handle to supply power. The hdmi & usb-c cable clamp 3271 can be attached to ensure the stability of the hard disk and the stability of data transmission. Moreover, there is a built-in screwdriver on the bottom of the cage for the assembly. There are multiple threaded holes on the bottom for mounting quick-release plates like 1280, 2146, and original plate for Arca of RS 2 / RS 3 / RSC 2 / RS 3 Pro. Its right side is ergonomically designed for a comfortable grip experience. The cage comes with shoulder strap holes on the top of each side for a shoulder strap or other accessories.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 5.71 Inches |
| Length | 7.64 Inches |
| Weight | 0.44 Pounds |
| Width | 3.88 Inches |
| Part Number | 3517-SR |
| Model | 3517-SR |
More information #ad
2. SMALLRIG
#adNATO Rail – 2203, New Version SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe
#adIt could be used on djI Ronin S or Zhiyun Crane 2 gimbal stabilizer. Perfect protectionsecure tightly via 2 screws on the top and bottom, 2 detachable small pins are used to prevent your camera from twisting.
More information #ad
Rubber pads on the bottom protect your camera body from scratching. For better setup, “smallrig lens adatper support for metabones 2247” and “smallrig hdmi cable clamp 2246”, please search “SmallRig Mount for Samsung T5 SSD 2245”, which are exclusively designed for BMPCC 4K & 6K. Mounting smallrig side Handle - 2187 for hand-held shooting. Mutiple moutingsthis cage comes with multiple mounting points, allow you to attach more accessories, such as 1/4’’ & 3/8’’ threaded holes, cold shoe and 3/8’’ locating holes for ARRI standard, like microphone or SmallRig Articulating Arm – 2070, etc.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 2.95 Inches |
| Length | 7.56 Inches |
| Weight | 0.79 Pounds |
| Width | 4.53 Inches |
| Part Number | 2203-SR |
| Model | 2203-SR |
More information #ad
3. Tilta
#adTilta Full Camera Cage Kit Compatible with BMPCC 4K/6K Cameras | TA-T01-A Tactical Gray
#adMore information #ad
15mm rod support secure 15mm rods to your system for Matte Boxes, Follow Focus Systems and Battery Plates. Protective armor for bmpcc 4k/6k minimizes Wear and Supports Many Accessories.| Brand | Tilta #ad |
| Manufacturer | Tilta #ad |
| Height | 3.54 Inches |
| Length | 9.84 Inches |
| Weight | 3 Pounds |
| Width | 8.66 Inches |
| Part Number | TA-T01-A-parent |
| Model | TA-T01-A-G |
More information #ad
4. SMALLRIG
#adSmallRig Full Cage Compatible with BMPCC 6K Pro Only for Blackmagic Pocket Cinema Camera 6K Pro, Built-in NATO Rail & Cold Shoe Mount, 3270
#adBottom structuresmallrig cage 3270 incorporates multiple threaded holes on the bottom to attach Quick Release Plates 1280 & 2146 and RS2 stabilizer and a built-in spanner for easy disassembly. Multiple mounting pointsit is equipped with multiple mounting points, such as 1/4" & 3/8" threaded holes, cold shoes, allowing you to connect more accessories such as SmallRig Quick Release Nato Rail 1409 and Smallrig Top Handle 2362, nato rail and locating holes for arri, etc.
More information #ad
Bottom slot for samsung t5 ssd and suits HDMI & USB-C cable clamp to ensure stability and smooth data transmission while shooting. It can also be disassembled and used as a half cage. Lightweight design with only 300g, the cage is made of aluminum alloy, with matte surface and strong oxygen resistance. It could be mounted with hdmi & usb-c cable clamp 3271 and T5 SSD Mount 3272 to improves compactness. Locating holes for arri on the top are compatible with Top Handle 2165 for handheld shooting, or it could be mounted with NATO Rail Handle 2270 & 2187 for better shooting. For bmpcc 6k pro / 6k g2smallrig full cage 3270 is specially designed for bmpcc 6k pro / 6k g2.
| Brand | SMALLRIG #ad |
| Manufacturer | SmallRig #ad |
| Height | 5.63 Inches |
| Length | 7.62 Inches |
| Weight | 0.66 Pounds |
| Width | 3.9 Inches |
| Part Number | 3270-SR |
| Model | 3270-SR |
More information #ad
5. SMALLRIG
#adWith Camera Cage, Side Handle, Top Handle, HDMI Cable Clamp, SmallRig Camera Cage Kit for BMPCC 6K Pro / 6K G2, SSD Mount for BMPCC 6K Pro / 6K G2-3584, 15mm Baseplate
#adThe cage kit comes with multiple 1/4"-20 threaded holes to support other accessories. What you get1 x cage; 1 x t5 ssd & usb-c cable clamp; 1 x cable clamp; 1 x top handle; 1 x baseplate with dual rod; 1 x NATO Side Handle; 6 x 1/4”-20 Screw; 1 x 3/8”-16 Screw; 2 x Allen Wrench.
More information #ad
The built-in t5 ssd & usb-c cable Clamp is further locked via a knob to prevent accidental disconnection. Comfortable handheld experiencethe kit comes with a universal top handle 1446 and a nato Side Handle HSN2427 for quick switching between two handheld shooting modes, hence stable movement shooting solutions. Fits for 15mm riser systemthe cage kit comes with a study and dual rod clamp with a standard 15mm rod hole, which suits 15mm dual rod, and is ideal for mounting Follow Focus 3010 and Matte Box 2660 or Mini Matte Box 3196 for easy and quick focus control in video shooting. Ssd mount includedcomes with a universal ssd mount for samsung T5/T7 SSD.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 10.28 Inches |
| Length | 9.45 Inches |
| Weight | 0.44 Pounds |
| Width | 6.61 Inches |
| Part Number | 3584-SR |
| Model | 3584-SR |
More information #ad
6. Tilta
#adTiltaing Camera Cage for BMPCC 4K/6K Basic Kit | Tilta Gray | Compatible with Blackmagic Pocket Cinema Cameras | Top Handle, USB-C Cable, SSD Drive Holder, HDMI Adapter Included | TA-T01-B
#adMore information #ad
This kit includes full camera cage for bmpcc 4k/6k, ssd drive holder for samsung t5, 90-Degree USB-C Cable 20cm, quick Release Top Handle, and HDMI 90-Degree Adapter for BMPCC 4K.| Brand | Tilta #ad |
| Manufacturer | Tilta #ad |
| Height | 3 Inches |
| Length | 8 Inches |
| Weight | 1.7 Pounds |
| Width | 7 Inches |
| Part Number | TA-T01-B-G |
| Model | TA-T01-B-G |
More information #ad
7. Tilta
#adTilta Advanced Kit Compatible with BMPCC 6K Pro / 6K G2, Tactical Gray
#adTilta #ad - Protective armor compatible with bmpcc 6k Pro Minimizes Wear and Tear Over Time. 15mm rod support via battery grip extension Bracket or 15mm LWS Baseplate. Quick release top handle provides more Flexibility When Operating and Handling.More information #ad
Power & record via the advanced Power Handle with Included Run Stop Cable. Mount accessories via nato rail, arri Compatible Rosettes, cold shoe receivers, 1/4"-20 Threads with Locating Pins.| Brand | Tilta #ad |
| Manufacturer | Tilta #ad |
| Height | 4.33 Inches |
| Length | 7.72 Inches |
| Weight | 3.17 Pounds |
| Width | 5.71 Inches |
| Part Number | TA-T11-A |
| Model | TA-T11-A |
| Warranty | 2 years for mechanical parts |
More information #ad
8. SMALLRIG
#adSMALLRIG Camera Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K, Compatible with BMPCC 4K & 6K, KCVB2419
#adTop recommendationwhen working with the camera field monitors, you could fix it to the top of cage kit 2419 with SMALLRIG Monitor Mount 1842. Original designsmallrig cage kit for blackmagic design pocket cinema camera 4k & 6k includes an integrated full cage, a top handle, and an SSD holder.
More information #ad
The cage kit features a built-in Nato rail that allows you to quickly release accessories with NATO clamp. The basic handheld kit for blackmagic Camera from SmallRig provides an ideal production tool for the BMPCC 4K & 6K. Mount for samsung t5 ssdthe ssd holder is fixed to the cage by two screws, securing the T5 SSD and protecting the USB-C cable. For handheld shootingthis top handle from smallrig features a shoe mount for microphone and led lights, is designed for handheld shooting, can hold the weight of a large cage rig with various attachments with ease. This is a basic and light handheld kit for BMPCC 4K & 6K users. The handle attaches directly to the cage’s NATO rail on the top and is adjustable fore and aft.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 6.91 Inches |
| Length | 8.35 Inches |
| Weight | 1.1 Pounds |
| Width | 4.65 Inches |
| Part Number | KCVB2419-SR |
| Model | KCVB2419-SR |
More information #ad
9. Tilta
#adBlack, Tilta Full Camera Cage Compatible with BMPCC 6K Pro
#adMore information #ad
Battery grip compatible via an Adjustable Bottom Plate. Mount accessories via nato rail, Cold Shoe Receivers, arri compatible rosettes, 1/4"-20 Threads with Locating Pins.| Brand | Tilta #ad |
| Manufacturer | Tilta #ad |
| Height | 4.33 Inches |
| Length | 7.7 Inches |
| Weight | 1.04 Pounds |
| Width | 5.71 inches |
| Part Number | TA-T11-FCC-B |
| Model | TA-T11-FCC-B |
More information #ad
10. SMALLRIG
#ad3299, SMALLRIG Camera Cage Accessory Kit for BMPCC 6K Pro / 6K G2, with Top Handle Wooden Side Handle HDMI Cable Clamp SSD Clamp Sunhood NATO Rail Screen Protector for BMPCC 6K Pro / 6K G2
#adFor bmpcc 6k pro / 6k g2smallrig camera accessory kit 3299 is specially designed for bmpcc 6k pro / 6k g2. Besides, the kit provides two pieces of tempered films that can be easily pasted onto the screen via electrostatic adsorption to protect the screen.
More information #ad
Cable clampthe built-in clamp for t5 ssd & USB-C Cable Clamp is further locked by a knob to prevent accidental disconnection during shooting. The threaded holes on the bottom support to attach Quick Release Plates 1280 & 2146 and stabilizer of DJI RS2. Mutifuctional cagespecial designed aluminum-alloy full cage 3270 can be split as a half cage. The built-in mount for t5 ssd takes up very little space and improves compactness and suits SSD & USB-C cable clamp to ensure stability and smooth data transmission while shooting. Nato top handle & side handlethe nato top handle 2362 can rotate 360 degrees and secures to any cage with nato rail on the top or side, and features multiple 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The nato side handle 2187 fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly.
| Brand | SMALLRIG #ad |
| Manufacturer | SMALLRIG #ad |
| Height | 7.83 inches |
| Length | 10.39 inches |
| Weight | 1.99 Pounds |
| Width | 8.54 inches |
| Part Number | 3299-SR |
| Model | 3299-SR |
More information #ad
