As an Amazon Associate I earn from qualifying purchases.

Lifetime warranty - this tilt control mechanism withstands heavyweight and can hold up to 500 lbs. It is very important to measure your mounting hole dimensions before ordering. Dimensions 10 inch longer x 6 inch wide 250mm x 150mm with 1.
It is very important to measure your mounting hole dimensions before ordering. Top quality replacement mechanism tilt control that fits most executive chairs - Get a new premium quality mechanism that fits most gaming chairs, executive chairs, and office swivel chairs. Fit also on the gas cylinder SGS and many others. If you are in doubt about the gas cylinder also buy the brand SGS which is guaranteed for life too.



Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders. Tilt control - push lever in to lock tilt, pull out to unlock. Heavy duty & standard size 6'' x 102" mounting holes center Distance Fit for Most Office Chairs.



Superior quality replacement mechanism orders- get a new premium quality mechanism that fits most gaming chairs, executive chairs and office swivel chairs. It is very important to measure the dimensions of your mounting hole before ordering.
Lifetime warranty - this heavy duty tilt control mechanism withstands a heavy weight of 500 lbs. Fit for the majority of gas cylinders. Easy disassembly and assembly- we have clear step-by-step photo instructions on listing page, so even a non-professional can install this mechanism chair. You get everything you need with the purchase so replacement is hassle free.


1. chairpartsonline
#ad
S2979, Replacement Office Chair Tilt Control Mechanism
#adchairpartsonline #ad - Tilt control - push lever in to lock tilt, pull out to unlock. Replacement office chair tilt mechanism with 102" long x 6" wide screw mounting hole pattern.More information #ad
Twist hand wheel to tighten or loosen adjust backward tilt tension. Single lever for gas cylinder height activation, accepts standard tapered gas lift cylinders. Black.Brand | chairpartsonline #ad |
Manufacturer | chairpartsonline #ad |
Height | 5 Inches |
Length | 16 Inches |
Width | 16 Inches |
Part Number | S2979 |
Model | S2979 |
More information #ad
2. SGS
#ad
Replacement, SGS, Mounting Hole Dimension 10"×6"L×W, Heavy Duty Office Chair Tilt Control Mechanism, For Executive, Desk And Gaming Chairs
#adSGS #ad - It is much more ecological and economical to repair the office or gaming chair. Easy removal and set-up- we've included clear step-by-step photo instructions so that even a non-pro can install this mechanism chair. Enjoy smooth and soundless 360-degree rotation on your office swivel chair.Lifetime warranty - this tilt control mechanism withstands heavyweight and can hold up to 500 lbs. It is very important to measure your mounting hole dimensions before ordering. Dimensions 10 inch longer x 6 inch wide 250mm x 150mm with 1.
More information #ad
1" hole diameter and 2. 5 mm tickness - our mechanism features. Also fits sGS gas cylinder and many others. If you are unsure about the gas cylinder, also purchase the SGS 5" or 6" brand which comes with a lifetime warranty. If you have any doubts about the gas cylinder you can also replace it with an SGS gas cylinder. It is very important to measure your mounting hole dimensions before ordering. Top quality replacement mechanism tilt control that fits most executive chairs - Get a new premium quality mechanism that fits most gaming chairs, executive chairs, and office swivel chairs. Fit also on the gas cylinder SGS and many others. If you are in doubt about the gas cylinder also buy the brand SGS which is guaranteed for life too.
Brand | SGS #ad |
Height | 0 Inches |
Length | 10 Inches |
Width | 6 Inches |
More information #ad
3. Yaegoo
#ad
Tilt Mechanism Replacement, Yaegoo Replacement Office Chair Tilt Control Mechanism
#adYaegoo #ad - Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders. Tilt control - push lever in to lock tilt, pull out to unlock.More information #ad
Twist hand wheel to tighten or loosen adjust backward tilt tension. Black. Replacement office chair tilt mechanism with 102" long x 6" wide screw mounting hole pattern.Brand | Yaegoo #ad |
Manufacturer | Duobang Fitness #ad |
Part Number | AB-0814 |
More information #ad
4. chairpartsonline
#ad
Heavy Duty Replacement Office Chair Swivel Tilt Control Seat Mechanism w/ 6" x 10.2" Mounting Holes, S2979-HD
#adchairpartsonline #ad - Heavy duty - rated up to 500 lbs. Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders. Heavy duty replacement office chair tilt mechanism with 102" long x 6" wide screw mounting hole pattern.More information #ad
Twist hand wheel to tighten or loosen adjust backward tilt tension. Tilt control - push lever in to lock tilt, pull out to unlock.Brand | chairpartsonline #ad |
Manufacturer | chairpartsonline #ad |
Part Number | S2979-HD |
Model | S2979-HD |
More information #ad
5. MySit
#ad
MySit Office Chair Tilt Mechanism Replacement, Heavy Duty 6'' x 10.2" Mounting Holes Tilt Control Mechanism
#adMySit #ad - Warning: lightweight people may possiblly feel NOT easy to tilt backward. If any problem, please feel free to contact us, we'll provide satisfied solutions.Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders. Tilt control - push lever in to lock tilt, pull out to unlock. Heavy duty & standard size 6'' x 102" mounting holes center Distance Fit for Most Office Chairs.
More information #ad
Twist hand wheel to tighten or loosen adjust backward tilt tension. Replacement office chair tilt mechanism with 102" long x 6" wide screw Mounting Holes Center Distance pattern. The maximum length is 104", minmum length is 9. 7". Heavy duty & standard size 6'' x 102" mounting holes center Distance Fit for Most Office Chairs.Brand | MySit #ad |
Manufacturer | MySit #ad |
Weight | 3.91 Pounds |
Part Number | Mechanism_Tilt |
More information #ad
6. Yoogu
#ad
6'' x 10.2" Heavy Duty Replacement Office Chair Swivel Tilt Control Seat Mechanism
#adYoogu #ad - Work for standard tapered gas lift cylinders. Please email to us via amazon when the it is bends, cracks, or breaks, we will reply you and solution whithin 24h.More information #ad
Twist hand wheel to tighten or loosen the tilt tension. It is extremely simple and convenient to install and operate. The standard size 6'' x 102" mounting holes center Distance, Fit for Most Office Chairs.Brand | Yoogu #ad |
Manufacturer | DONGGUAN YUNGU #ad |
More information #ad
7. Warmword
#ad
6"x10" Tilt Control and Gas Lift,Replacement Office Chair Tilt Control Mechanism
#adWarmword #ad - Replacement office chair tilt mechanism. Size:6"x10", see picture. Gas lift, for seat height adjustment, right-left traverse the lever for locking/tilting. Solid and durable, easy to install. Function:tilt control and gas lift. Replacement Gas lift mechanism for many office chairs.More information #ad
Brand | Warmword #ad |
Manufacturer | Warmword #ad |
Height | 2.99 Inches |
Length | 10 Inches |
Weight | 3.15 Pounds |
Width | 5.98 Inches |
Part Number | 91 |
Model | 91 |
More information #ad
8. SGS
#ad
Desk and Gaming Chairs, Base for Executive, Office Chair Swivel Tilt Control Seat Mechanism Replacement, Mounting Hole Size is Not Standard Dimension 8.6"×5.9" L×W, SGS
#adSGS #ad - Our mechanism features. It is very important important important to measure your mounting hole dimensions before ordering. Also fits sGS gas cylinder and many others. If you are unsure about the gas cylinder, also purchase the SGS 5" or 6" brand which comes with a lifetime warranty.Superior quality replacement mechanism orders- get a new premium quality mechanism that fits most gaming chairs, executive chairs and office swivel chairs. It is very important to measure the dimensions of your mounting hole before ordering.
More information #ad
Non-standard size - 8. 6 inch longer x 5. 9 inch wide with 1. 1" hole diameter and 2. 5 mm tickness - this piece is smaller than the standard mechanisms. Not standard size. It is much more environmentally friendly, economical and pleasure to repair your favorite office or gaming chair. Lifetime warranty - this heavy duty tilt control mechanism withstands a heavy weight of 500 lbs. Fit for the majority of gas cylinders. Easy disassembly and assembly- we have clear step-by-step photo instructions on listing page, so even a non-professional can install this mechanism chair. You get everything you need with the purchase so replacement is hassle free.
Brand | SGS #ad |
Manufacturer | EBSHOP #ad |
More information #ad
9. Generic
#ad
10"x6" Replacement Heavy Duty Office Swivel Chair Gas Lift Tilt Control Mechanism for Executive, Desk & Gaming Chair
#adGeneric #ad - This will not fit a 10 1/4" x 6" nor a 8" x 6" mounting holes. Combination lever to adjust chair height & locks rocking. Please verify your mounting holes measurements before purchasing.More information #ad
Mounting hole side to side is 6". Mounting holes front to back is 10". Accepts standard gas cylinder, 1. 102" diameter 1 1/8" diameter. Large knob for adjust tilt back tension.Brand | Generic #ad |
Manufacturer | FD Raptor Products #ad |
Height | 4.75 Inches |
Length | 11 Inches |
Weight | 3.62 Pounds |
Width | 13.5 Inches |
More information #ad
10. Skuehod
#ad
Heavy Duty Mechanism Gas Type Office Chair Swivel Tilt Control Seat Replacement Parts
#adSkuehod #ad - The back right handle pulled up is adjust the angle of backcusion. Fit's up to most large executive chairs and tasking chairs secretary chairs- 350LB Load. Package with 1pcs chair mechanism and 1pcs supporting steel plate. The front right handle adjust the heights of chair.More information #ad
Brand | Skuehod #ad |
Manufacturer | Skuehod #ad |
Height | 3.3 Inches |
Length | 15 Inches |
Width | 14 Inches |
More information #ad