YKS 3DR Radio Telemetry Kit 915Mhz Module Open Source for APM 2.6 2.8 Pixhawk RC Quadcopter

#ad
#ad
YKS #ad - Connect the PC tablet. Based on the hoperf hm-trp radio module, featuring an SiLabs Si1000 RF micro controller and Si4432 wireless module. Specifications: band: 915mhz antenna connectors: rp-sma connector output power: 100mw 20dbm, adjustable between 1-20dBm Sensitivity: -117dBm sensitivity Interface: Standard TTL UART Support for LBT and AFA Open source firmware Connection status: LED indicators Net Weight: 57g / 2.

YKS 3DR Radio Telemetry Kit 915Mhz Module Open Source for APM 2.6 2.8 Pixhawk RC Quadcopter #ad - 01oz features: transparent serial link range of approx 1 mile with supplied antennas demonstrated range of several kilometers with a small omni antenna can be used with a bi-directional amplifier for even more range MAVLink protocol framing and status reporting Frequency hopping spread spectrum FHSS Adaptive time division multiplexing TDM Configurable duty cycle Built in error correcting code can correct up to 25% data bit errors AT commands for radio configuration RT commands for remote radio configuration Package Includes: 1 x Radio Telemetry base station USB Connection 1 x Telemetry Transceiver Pin Header 1 x lead set 2 x Antenna Very small size, light weight about 4 grams without antenna.

Transmit power up to 20dBm 100mW, air data rates up to 250kbps. Support for lbt and AFA, 915Mhz frequency band. Adaptive flow control when used with APM. Usb interface reciever.

More information about YKS #ad

BW® Glass Fiber Flight Controller Anti-vibration Damping Plate Shock Absorber Set for APM2.5/2.6 /KK /MWC

#ad
#ad
BW #ad - Weight: 25g package includes: 1 x bw® anti-vibration board 1 x bw® anti-vibration ball 1 x bw® Double-sided adhesive If any questions, please do not hesitate to contact us and we will try our best to help you ! Suit for various kinds of flight controller, like APM 2. 5/2. 6, kk, mwc.

BW® Glass Fiber Flight Controller Anti-vibration Damping Plate Shock Absorber Set for APM2.5/2.6 /KK /MWC #ad - Material: Glass fiber. Suit for different various kinds of flight controller, like APM 2. 5/2. 6, kk, mwc 2. Size: 10 x 8 x 1cm / 3. 9 x 3. 1 x 04in. Description: 1. Size: 10 x 8 x 1cm / 3. 9 x 3. 1 x 04in 4. Weight: 25g. Material: Glass fiber 3.

More information about BW #ad


Similar products



Radiolink Pixhawk PX4 32 Bit ARM Flight Controller + NEO-M8N GPS + Pixhawk Power Module for RC Multirotor Quad for RC Multirotor Quad with 4G Micro-SD

#ad
#ad
Radiolink #ad - Processor: 32bit stm32f427 arm cortex m4 core + fpu floating point unit 168 mhz / 256 kb ram / 2 mb ram 32bit stm32f103 fault protection coprocessor sensor: st micro l3gd20h 16 bit gyroscope st micro lsm303d 14 bit accelerometer/magnetometer invensense mpu 6000 3-axis accelerometer/gyroscope MEAS MS5611 barometer Package included: 1x Radiolink PIX Flight Controller ; 1x M8N GPS Module ;1x GPS Stand Holder ; 1x Power Module ;1x Safe Switch ; 1x Buzzer; 1x 4G Memory Card ; 1x Dupont Cable; 2x Adhesive Suit for various kinds of flight controller, like APM 2.

5/2. 6, kk, mwc. Material: Glass fiber. Size: 10 x 8 x 1cm / 3. 9 x 3. 1 x 04in. Weight: 25g. We recommend setting up and tuning the radiolink pixhawk with the Mission Planner The first thing you need to do after PIX gets it is to brush it into your own Firmware. Note: if the pix is not set up in accordance with the rules before the flight, it may result in an unhealthy accelerometer or an error in the geomagnetism, which may cause your machine to fail to work or even cause damage.

Radiolink Pixhawk PX4 32 Bit ARM Flight Controller + NEO-M8N GPS + Pixhawk Power Module for RC Multirotor Quad for RC Multirotor Quad with 4G Micro-SD #ad - On the basis of 3dr pix function, less interference of inner components, less noise, developed optimized circuit design and creative design automation software QA system, more accurate compass and safely while flying. It can be used on a variety of devices, stunt, return, fixed-wings and a variety of different forms of Multicopter.

More information about Radiolink #ad


Similar products



yueton 30Pairs 3.5mm Male Female Banana Plug Bullet Connector Replacements

#ad
#ad
yueton CECOMINOD016801 #ad - Size: 10 x 8 x 1cm / 3. 9 x 3. 1 x 04in. Male female banana plug pack of 30 pairs, 30pcs male plugs and 30pcs female plugs Color: gold Size: 3. 5*12mm d*h material: metal capable of optimizing current flow Suit for various kinds of flight controller, like APM 2. 5/2. 6, kk, mwc. Material: Glass fiber. The weight for power module is 39g.

Package included: 1x radiolink pix flight controller ;1x m8n gps module ;1x gps Stand Holder ;1x Power Module ;1x Safe Switch ;1x Buzzer;1x 4G Memory Card ;1x Dupont Cable; 2x Adhesive. Low resistance, and gives the best electric flow. Male and female banana bullet connector. On the basis of 3dr pix function, less noise, less interference of inner components, developed optimized circuit design and creative design automation software QA system, more accurate compass and safely while flying.

yueton 30Pairs 3.5mm Male Female Banana Plug Bullet Connector Replacements #ad - It can be used on a variety of devices, return, stunt, fixed-wings and a variety of different forms of Multicopter. Support for self-stability, drift, following, sports, fixed, hover, automatic, guidance, including Remote Control Cars, landing, circling, high-set, Helicopters, all-powerful!. The production process realizes full-automatic mechanical and anti-static welding, reduces the interference of geomagnetism sensors, and cooperates with automated testing procedures to ensure that the products are durable.

Advanced 32 bit cortexm4 arm high performance processor, 32 bit stm32stmf100 failsafe co-processor; A powerful hardware device can give you enough room for creation, and you can implement more functions you want through simple programming. Weight: 25g.

More information about yueton CECOMINOD016801 #ad


Similar products



Pixnor Apm2.6 MWC GPS Compass Antenna Folding Fixed Mount Bracket Holder for DJI Red

#ad
#ad
Pixnor 172354O63OI5005 #ad - Weight: 25g. 100% brand new and high quality cNC Aluminum GPS Folding Antenna Base Mount Holder Bracket Set. Adopt aluminum turning and CNC manufacturing for durable to use. Color: mainly red. Rod diameter: about 4mm, Height: about 16. 2cm. Package including 1 * cnc aluminum gps folding antenna base Mount Holder Bracket Set for DJI Quadcopter Multicopter Red Suit for various kinds of flight controller, like APM 2.

5/2. 6, kk, mwc. Material: Glass fiber. Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use. Easy to install and use. Package includes: 30pcs male plugs and 30pcs female plugs.

Pixnor Apm2.6 MWC GPS Compass Antenna Folding Fixed Mount Bracket Holder for DJI Red #ad - Size: 10 x 8 x 1cm / 3. 9 x 3. 1 x 04in.

More information about Pixnor 172354O63OI5005 #ad


Similar products



FrSky Taranis Compatible Receiver X8R 8-channel 2.4ghz ACCST&RSSI&SBUS Easy To Use Receiver

#ad
#ad
FrSky NPH-01266 #ad - Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use. Easy to install and use. 1more number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.

FrSky Taranis Compatible Receiver X8R 8-channel 2.4ghz ACCST&RSSI&SBUS Easy To Use Receiver #ad - 2parallel two x8R to become a 16 channel receiver. 3with rssi pwm output 0~3. 3v. 4smart port enabled, realizing two-way full duplex transmission. 5frsky Brand. The weight for power module is 39g. Package included: 1x radiolink pix flight controller ;1x m8n gps module ;1x gps Stand Holder ;1x Power Module ;1x Safe Switch ;1x Buzzer;1x 4G Memory Card ;1x Dupont Cable; 2x Adhesive.

Model name:x8r-pcb specifications: Dimension: 46. 47*26. 78*14. 12mm l *w *h weight: 16. 6g number of channels: 16ch 1~8ch from conventional channel outputs, 1~16ch from SBUS port or combine two X8R to become a 16 channels receiver With RSSI PWM output 0~3. 3v operating Voltage Range: 4.

More information about FrSky NPH-01266 #ad


Similar products



FPVDrone Power Module V1.0 XT60 Plug Current Sensor for APM2.8 APM2.6 APM Pixhawk Flight Controller

#ad
#ad
LongJinSheng #ad - Weight: 25g. It isnotdesigned to power servos. The power module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection. Use your aircraft's own ESC/BEC for that. Male and female banana bullet connector. The apm 2. 5 power module is a simple way of providing your APM 2. 5 with clean power from a liPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable.

Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use. Easy to install and use. 1more number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.

FPVDrone Power Module V1.0 XT60 Plug Current Sensor for APM2.8 APM2.6 APM Pixhawk Flight Controller #ad - 2parallel two x8R to become a 16 channel receiver. 3with rssi pwm output 0~3. 3v. Size: 10 x 8 x 1cm / 3.

More information about LongJinSheng #ad


Similar products



Readytosky M8N GPS Module Built-in Compass Protective Case with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 Flight Controller

#ad
#ad
Readytosky XGT60-BLACK #ad - Extra lna for - lowest noise figure - Anti jamming Active CW detection and removal. Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use.

Easy to install and use. 1more number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver. 2parallel two x8R to become a 16 channel receiver. 3with rssi pwm output 0~3. 3v. Size:82*51. 4*16. 2mm. Use your aircraft's own ESC/BEC for that. Special designed for pixhawk 2.

Readytosky M8N GPS Module Built-in Compass Protective Case with GPS Antenna Mount for Standard Pixhawk 2.4.6 2.4.8 Flight Controller #ad - 4. 6 2. 4. 8 flight controller, aSIN:B07CHQ7SZ4. Note:if you use it to aPM Flight Controller, Please replace the connect by yourself.

More information about Readytosky XGT60-BLACK #ad


Similar products



Pixhawk 2.1 Cable Set

#ad
#ad
HEX Technology #ad - 1 x usb cable, 1 x 1 x gps1 Cable w/Safety Button,. 1 x buzzer Cable. Size:82*51. 4*16. 2mm. High quality gold tone color. On the basis of 3dr pix function, developed optimized circuit design and creative design automation software QA system, less interference of inner components, less noise, more accurate compass and safely while flying.

It can be used on a variety of devices, stunt, return, fixed-wings and a variety of different forms of Multicopter. Support for self-stability, high-set, circling, hover, Helicopters, drift, including Remote Control Cars, automatic, fixed, following, landing, sports, guidance, all-powerful!. The production process realizes full-automatic mechanical and anti-static welding, reduces the interference of geomagnetism sensors, and cooperates with automated testing procedures to ensure that the products are durable.

Pixhawk 2.1 Cable Set #ad - Advanced 32 bit cortexm4 arm high performance processor, 32 bit stm32stmf100 failsafe co-processor; A powerful hardware device can give you enough room for creation, and you can implement more functions you want through simple programming. The weight for power module is 39g. Package included: 1x radiolink pix flight controller ;1x m8n gps module ;1x gps Stand Holder ;1x Power Module ;1x Safe Switch ;1x Buzzer;1x 4G Memory Card ;1x Dupont Cable; 2x Adhesive.

Cables for accessories are jst to df13 cables which are compatible with old Pixhawk accessories, such as Telemetry, Power Brick or GPS Suit for various kinds of flight controller, like APM 2.5/2. 6, kk, mwc.

More information about HEX Technology #ad


Similar products



Gikfun Assorted APM 2.6 2.52 Flight Control Cable DF13 4/5/6 Position Connector Pack of 8pcs AE1032

#ad
#ad
Esooho LYSB01DUAWIRY-ELECTRNCS #ad - 5p*4pcs. Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use. Easy to install and use. 1more number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver.

2parallel two x8R to become a 16 channel receiver. 3with rssi pwm output 0~3. 3v. Voltage and current measurement configured for 5V ADC. 6-pos df13 cable plugs directly to APM 2. 5's 'pm' connector. Switching regulator outputs 5. 3v and 3A max. The power module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.

Gikfun Assorted APM 2.6 2.52 Flight Control Cable DF13 4/5/6 Position Connector Pack of 8pcs AE1032 #ad - Note: the power module is only designed to power apm, a rc receiver and APM accessories GPS, 3DR radio. High quality gold tone color. 6p/5p/4p, 20cm. 2 x i2c Cable.

More information about Esooho LYSB01DUAWIRY-ELECTRNCS #ad


Similar products



RAYCorp® 1045 10x4.5 Propellers. 8 Pieces4 CW, 4 CCW Black & Red High Quality 10-inch Quadcopter and Multirotors Props + Battery strap

#ad
#ad
RAYCorp Manufacturer #ad - 1 x usb cable, 1 x 1 x gps1 Cable w/Safety Button,. 1x gps2 Cable. Rod diameter: about 4mm, Height: about 16. 2cm. Cnc aluminum gps folding Antenna Base Mount Holder Bracket Set. Suitable for most DJI WKM Quadcopter Multicopter. Adopt aluminum turning and CNC manufacturing for durable to use. Easy to install and use.

1more number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port, or combine two X8R to become a 16 channels receiver. 2parallel two x8R to become a 16 channel receiver. 3with rssi pwm output 0~3. 3v. Main characteristics Diameter: 10inches Pitch: 4. 5 shaft diameter : 6 mm weight: 10 grams material : High Quality ABS Plastic Suit for various kinds of flight controller, like APM 2.

RAYCorp® 1045 10x4.5 Propellers. 8 Pieces4 CW, 4 CCW Black & Red High Quality 10-inch Quadcopter and Multirotors Props + Battery strap #ad - 5/2. 6, kk, mwc. Material: Glass fiber. Size:82*51. 4*16. 2mm. Weight: 25g.

More information about RAYCorp Manufacturer #ad


Similar products